Avaya 100BASE-FX, LC, SFP AA1419074-E6 Manuel D’Utilisation
Codes de produits
AA1419074-E6
Parameter
Specifications
Average launch power
– 6.5 to 0.5 dBm
Peak launch power
3 dBm
Root-mean-square spectral width
2.4 to 4 nm
Launch power in OMA
– 4.5 to 1.5 dBm
Maximum average launch power of OFF
transmitter
transmitter
– 30 dBm
Minimum extinction ratio
3.5 dB
Maximum relative intensity noise at OMA—
RIN
RIN
12
OMA
– 128 dB/Hz
Optical return loss tolerance (minimum)
– 20 dB
Receiver characteristics
Maximum receive average power for
damage
damage
1.5 dBm
Receiver reflectance (maximum)
– 12 dB
For more information about the conditions used for the stressed receiver tests, and other
information, see the IEEE 802.3aq standard.
information, see the IEEE 802.3aq standard.
The following table (from IEEE 802.3aq) describes the maximum channel insertion loss. The
channel insertion loss includes both attenuation and connector loss (1.5 dB); therefore the
maximum fiber attenuation is 0.2 to 0.4 dB.
channel insertion loss includes both attenuation and connector loss (1.5 dB); therefore the
maximum fiber attenuation is 0.2 to 0.4 dB.
Table 27: 10GBASE-LRM channel insertion loss and range
Fiber type (core diameter
and OFL bandwidth)
Range
Maximum channel
insertion loss
62.5 μm (FDDI grade)
• 160 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m
1.9 dB
62.5 μm (ISO/IEC OM1)
• 200 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m
1.9 dB
50 μm (ISO/IEC OM2)
• 500 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m
1.9 dB
50 μm
Up to 100 m
1.7 dB
10GBASE-LRM XFP specifications
Installation — SFPs and XFPs
December 2010 57