Avaya 1000BASE-XD DDI, 1310nm, SFP AA1419050-E6 Manuel D’Utilisation
Codes de produits
AA1419050-E6
Removing an SFP
Remove an SFP to replace it or to commission it elsewhere.
For translations of the following messages, see
page 16.
Prerequisites
Wear an antistatic wrist strap.
Warning:
Risk of eye injury by laser
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber optic cables are connected
to a light source.
into an optical fiber or connector port. Always assume that fiber optic cables are connected
to a light source.
Electrostatic alert:
Risk of equipment damage
To prevent damage from electrostatic discharge, always wear an antistatic wrist strap
connected to an ESD jack.
connected to an ESD jack.
Procedure steps
1. Disconnect the network fiber optic cable from the SFP connector.
2. Affix dust covers over the fiber optic bore and connector.
3. Depending on your SFP model, to release the SFP, press the locking and extractor
mechanism.
4. Slide the SFP out of the module SFP slot.
Removing an SFP
Installation — SFPs
December 2011 27