Rose Orion ORR-SRDTX0D1D Fascicule
Codes de produits
ORR-SRDTX0D1D
Phone: 281-933-7673
E-mail: sales@rose.com
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: +49 (0
)
2454 969442 Rose Electronics – Asia: +65 6324 2322
DS-OR-16x32 -3.1 Copyright 2009 Rose Electronics. All rights reserved
W W W . R O S E . C O M
Typical Applications
KVM Switch Crosspoint Switch
(up to 16 user stations and 32 connected computers) (up to 32 signal sources to 16 monitors)
Cables…
Cabling from the transmitters to
Orion
and from
Orion
to the receiver uses CATx solid wire (AWG24) cable or
singlemode or multimode fiber cable. Cabling from the
computers and the transmitter uses Rose Electronics DVI-CPU
adapter cable.
computers and the transmitter uses Rose Electronics DVI-CPU
adapter cable.
The KVM station’s keyboard, DVI monitor, and
mouse connect directly to the receiver.
Installation…
The installation of the
Orion
will vary depending
upon the operating mode the unit will be configured for; KVM
switch or Crosspoint switch. Cable connections will also vary
depending on the configuration needed and operating mode.
switch or Crosspoint switch. Cable connections will also vary
depending on the configuration needed and operating mode.
Operation…
Operating the
Orion
can be done by using the
convenient on-screen display. The serial interface allows you to
send switching commands to the unit using a RJ45 to DB9
cable connected to the unit and a computer’s serial port.
Keyboard commands can also be used to place the unit in the
command mode. In the command mode, you can to switch
ports, sequence through all channels, and other functions.
send switching commands to the unit using a RJ45 to DB9
cable connected to the unit and a computer’s serial port.
Keyboard commands can also be used to place the unit in the
command mode. In the command mode, you can to switch
ports, sequence through all channels, and other functions.
Keyboard:
The transmitter and receiver units have a USB
Type A keyboard connector
Monitor:
The monitor connector is a 24 pin DVI-I video
connector.
(30 pin connector is for serial and audio models only)
(30 pin connector is for serial and audio models only)
Mouse:
The transmitter and receiver units have a USB
Type A mouse connectors
Serial / Audio option:
This option allows bi-directional stereo
audio and full duplex serial data to be sent over the interface
cable (CATx or Fiber).
cable (CATx or Fiber).
Part Number
ORS-TPyyXzz CATx model
ORS-FMyyXzz Fiber model (multimode)
ORS-FSyyXzz Fiber model (Singlemode)
yy = Console ports (08, 16)
zz = CPU ports (08, 16, 24, 32)
ORS-FMyyXzz Fiber model (multimode)
ORS-FSyyXzz Fiber model (Singlemode)
yy = Console ports (08, 16)
zz = CPU ports (08, 16, 24, 32)
Specifications
Dimensions
19.0 W x 17.7 D x 3.35 H (in)
483 W x 450 D x 85 H (mm)
Weight
12.9 lbs (0.6 kg
Resolution
Up to 1920 x 1200 (Single-Link)
Connectors
CPU / KVM
LC Type fiber
Network
RJ45F
RS232 RJ11F
USB Type B
Monitor 24 or 30 pin DVI-I
Power
90 – 240 VAC, 47 – 63 Hz, 0.5A -
+5VDC, 4000mA, auto switching
Switching
KVM Switch – Keyboard, Serial interface
Crosspoint Switch – Serial interface
Video
DVI-D
Kbd / Mouse USB
Distance
400 feet (140 M) over CAT5 cable
650 Feet (200M) over
multimode fiber (62.5µm)
1,300 feet (400M) over
multimode fiber (50µm)
33,000 feet (10KM) over
singlemode fiber (9µm)
Environmental
Oper. temp
Oper. temp
41°F-113°F (5°C-45°C)
Storage temp -13°F-140°F (-25°CF-60°C)
Humidity
Humidity
80% non-condensing
Certificates CE
Rear View
(16 Fiber / 16 CATx inputs / 8 Fiber / 8 CATx outputs)