HP A2Y15AV Manuel D’Utilisation
Processor Configuration Registers
314
Datasheet, Volume 2
4
RO
0b
Uncore
Required Write-Buffer Flushing (RWBF)
0 = Indicates no write-buffer flushing is needed to ensure
0 = Indicates no write-buffer flushing is needed to ensure
changes to memory-resident structures are visible to
hardware.
1 = Indicates software must explicitly flush the write buffers to
ensure updates made to memory-resident remapping
structures are visible to hardware.
3
RO
0b
Uncore
Advanced Fault Logging (AFL)
0 = Advanced fault logging is not supported. Only primary fault
0 = Advanced fault logging is not supported. Only primary fault
logging is supported.
1 = Advanced fault logging is supported.
2:0
RO
010b
Uncore
Number of domains supported (ND)
000 = Hardware supports 4-bit domain-ids with support for up
000 = Hardware supports 4-bit domain-ids with support for up
to 16 domains.
001 = Hardware supports 6-bit domain-ids with support for up
to 64 domains.
010 = Hardware supports 8-bit domain-ids with support for up
to 256 domains.
011 = Hardware supports 10-bit domain-ids with support for up
to 1024 domains.
100 = Hardware supports 12-bit domain-ids with support for up
to 4K domains.
100 = Hardware supports 14-bit domain-ids with support for up
to 16K domains.
110 = Hardware supports 16-bit domain-ids with support for up
to 64K domains.
111 = Reserved.
B/D/F/Type:
0/0/0/VC0PREMAP
Address Offset:
8–Fh
Reset Value:
00C9008020660262h
Access:
RO
Size:
64 bits
BIOS Optimal Default
000h
Bit
Access
Reset
Value
RST/
PWR
Description