Gamber-Johnson 7160-0370 Fascicule
Placement
Tilt
Swivel
Weight
Height
Width
Depth
Attaches to rectangular forklift
support braces 2.5” to 5.0” wide
Yes - up to 160° total
No
5.8 lbs.
4.6"
6.8"
5.28"
Features:
• Heavy gauge steel construction for long-term durability in a rugged environment
• Black powdercoat fi nish for maximum corrosion resistance
• Clam Shell features the following hole patterns: AMPS, NEC and 75mm VESA
• The
• Black powdercoat fi nish for maximum corrosion resistance
• Clam Shell features the following hole patterns: AMPS, NEC and 75mm VESA
• The
Clam Shell can be tilted up or down for a total of 160°
• To tilt the
Clam Shell simply loosen the adjustable lever, tilt to desired position and then re-tighten the lever
• A secondary bolt is included to lock the clam shell into a permanent position
• Plate sandwiches the forklift support brace and allows user to position the device at the desired height position
• Plate sandwiches the forklift support brace and allows user to position the device at the desired height position
W
H
D
Item No.
7160-0370
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: gamberj@gamberjohnson.com | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
FORKLIFT MOUNT:
FORKLIFT MOUNT:
CLAM SHELL WITH LARGE PLATE
CLAM SHELL WITH LARGE PLATE
CLAM SHELL WITH LARGE PLATE
NEW