Supermicro PDSML-LN2 Manuel D’Utilisation

This manual is written for system integrators, PC technicians and 

knowledgeable PC users.  It provides information for the installation and use of the 

 PDSML-LN1/PDSML-LN2 motherboard. The PDSML-LN1/PDSML-LN2 

supports single Intel Pentium D (Dual-Core)/Pentium 4 Extreme Edition/Pentium 

4/Celeron D LGA (Land Grid Array) 775 Processors at system bus speeds of 1066 

MHz/800 MHz/533 MHz.  The LGA 775 Pentium D/Pentium 4/Celeron D Processor 

is housed in a Flip-Chip Land Grid Array (FC-LGA4) package that interfaces with the 

motherboard via an LGA775 socket. The PDSML-LN1/PDSML-LN2 supports Intel 

Hyper-Threading (HT) Technology, EM64T Technology, Enhanced Intel SpeedStep 

Technology (EIST) and Matrix Storage Technology.  Please refer to the mother-

board specifi cations pages on our web site (http://www.supermicro.com/Product) 

for updates or visit Intel's web site for processor support. This product is intended 

to be professionally installed.    

Chapter 1 describes the features, specifi cations and performance of the PDSML-

LN1/PDSML-LN2 mainboard and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions.  Read this chapter when 

installing the processor,  memory modules and other hardware components into the 

system. If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the system setup.

Chapter 4 includes an introduction to BIOS and provides detailed information on 

running the CMOS Setup utility.

Appendix A provides BIOS POST Messages. 

Appendix B lists BIOS POST Codes. 

Appendix C lists Software Installation Instructions.

Special attention should be given to the following symbols for proper installation and 
to prevent damage done to the components or injury to yourself: 

*Note:  Additional Information given to differentiate various models or to provide 

correct system setup instructions.

Preface

iii

Warning: Important information given to ensure proper system installation 

or to prevent damage to the components.

Danger/Caution: Instructions to be strictly followed to prevent catastrophic 

system failure or to avoid bodily injury.