HP 150 466132-001+BNDL Manuel D’Utilisation

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.

 

HP ML150 G6 Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W) Processor Kit

507849-B21

HP ML150 G6 Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W) Processor Kit

507848-B21

HP ML150 G6 Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W) Processor Kit

507722-B21

HP ML150 G6 Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W) Processor Kit

507847-B21

HP ML150 G6 Intel® Xeon® E5504 (2.00GHz/4-core/4MB/80W) Processor Kit

507721-B21

 

HP ML150 G6 Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W) Processor Kit

507720-B21

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit

500656-B21

HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit

500658-B21

 

HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit

500668-B21

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit

500670-B21

HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit

500672-B21

NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: 

.

NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant
Energy Efficient Features, see: 

 

HP Half-Height SATA DVD-ROM Optical Drive

447326-B21

HP Half-Height SATA DVD-RW Optical Drive

447328-B21

HP 5U Large Form Factor (LFF) Hot Plug Drive Cage Kit

NOTE: A 2nd hot-plug hard disk drive cage option kit is needed to support more than 4
hard drives.

487737-B21

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and
the server backplane) should operate at the same data transfer rate or the system
bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported
by the HBA or Controller. Refer to the HBA or Controller technical specifications for
details.
NOTE: Mixing SAS and SATA hard drives is allowed. However, only SAS hard drives will
be used for RAID setting.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: HP Smart Array B110i does not support greater than 2TB hard drive.

 

Core Options

DA - 13249   Worldwide — Version 33 — September 24, 2012

Page  18