Gamber-Johnson 7160-0367 Fascicule

Attaches to rectangular forklift 

support braces 2.5” to 5.0” wide

Yes - up to 90° fore

Motion Attachment - 360° 

Entire arm - 360° can lock at every 15°"

7.5 lbs.

9.77"

8.26"

7.14"

•  Heavy gauge steel construction for long-term durability in a rugged environment
•  Black powdercoat fi nish for maximum corrosion resistance

 features the following hole patterns:  AMPS, NEC and 75mm VESA

• The 

 can be tilted up or down for a total of 160°

•  To tilt the 

 simply loosen the adjustable lever, tilt to desired position and then re-tighten the lever

•  A secondary bolt is included to lock the clam shell into a permanent position

•  Heavy gauge steel construction for long-term durability in a rugged environment
•  Black powdercoat fi nish for maximum corrosion resistance

 features the following hole patterns:  AMPS, NEC and 75mm VESA 

• The 

 can be tilted up or down for a total of 160°

•  To tilt the 

 simply loosen the adjustable lever, tilt to desired position and then re-tighten the lever

•  A secondary bolt is included to lock the clam shell into a permanent position
•  Plate sandwiches the forklift support brace and allows user to position the device at the desired height position

3001 Borham Ave.  |  Stevens Point, WI  54481, USA

Phone: 715.344-3482  |  Toll-free: 800.487-9220  |  Fax: 715.344-5209

Email: gamberj@gamberjohnson.com | Website: www.gamberjohnson.com

This  document, including images, may not be reproduced partly or fully without the expressed written 
consent of Gamber-Johnson’s Marketing Department. © Copyright  2012 Gamber-Johnson LLC

FORKLIFT MOUNT:

FORKLIFT MOUNT:
DUAL CLAM SHELL WITH LARGE PLATE

DUAL CLAM SHELL WITH LARGE PLATE