Triplett 9325 Manuel D’Utilisation
Operation
NOTICES: Read and understand all warning and precaution
statements listed in the safety section of this operation manual
prior to using this meter. Set the function select switch to the
OFF position when the meter is not in use.
statements listed in the safety section of this operation manual
prior to using this meter. Set the function select switch to the
OFF position when the meter is not in use.
AC/DC Current Measurements
WARNING: Ensure that the test leads are disconnected from
the meter before making current clamp measurements.
WARNING: Ensure that the test leads are disconnected from
the meter before making current clamp measurements.
1.Set the Function switch
to the 1000ADC,600ADC,
1000AAC or600AAC range.
to the 1000ADC,600ADC,
1000AAC or600AAC range.
2.If the range of the
measured is not known,
select the higher range first
then move to the lower
range if necessary.
measured is not known,
select the higher range first
then move to the lower
range if necessary.
3.Press the trigger to open
jaw. Fully enclose one
conductorto be measured.
jaw. Fully enclose one
conductorto be measured.
The clamp meter LCD will display the reading.