Toshiba 20HLV16 Manuel D’Utilisation

Before you connect this TV/DVD to your PC, change the adjustment of
your PC’s Resolution and Refresh rate. See “Monitor display modes”
on right.
Connect one end of a (male to male) VGA cable to the video card of
the computer and the other end to the VGA connector PC at the side of
the TV/DVD. Fix the connectors firmly with the screws on the plug. In
case of a Multimedia computer, connect the audio cables to the audio
outputs of your Multimedia computer and to the AUDIO L and R
connectors of the PC IN jacks of the TV/DVD.
Set the video input source to PC mode (see “Selecting the video input
source” on page 31 and “Picture/Audio adjustments in the PC mode”
on page 43). The TV/DVD can be used as a computer monitor.

Mode

Resolution

Refresh rate

VGA

640x480

60Hz

VGA

720x400

70Hz

WVGA

848x480

60Hz

SVGA

800x600

60Hz

XGA

1024x768

60Hz

WXGA

1280x720

60Hz

WXGA

1280x768

60Hz

WXGA

1360x768

60Hz

You will need:
• one VGA (15-pin) computer cable
• one PC audio cable

• Some PC models cannot be connected to

this TV.

• An adapter is not needed for computers with a

DOS/V compatible mini D-sub 15-pin terminal.

• The on-screen displays will have a different

appearance in PC mode than in TV mode.

• If your PC display output corresponds to a

WVGA or a WXGA resolution as indicated in
the chart above (example: WXGA 1360 x
768), you must set the WVGA INPUT or
WXGA INPUT to the ON position in the PC
Picture menu in the TV (see page 43).

ALWAYS use the VGA port provided to connect a PC.

Conversion adapter (if necessary)

Audio cable

Audio
output

 5X20601A(E)P11-21

17/3/06, 12:23 PM

20

Get user manuals: 

See SafeManuals.com