Toshiba 46vx700u Manuel D’Utilisation
33
Chapter 6: Basic features
Using Channel Return
You can switch between two channels without entering
a channel number each time. This feature also works for
external inputs.
a channel number each time. This feature also works for
external inputs.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (=) button if needed).
buttons (and the dash (=) button if needed).
3
Each time you press
, the TV switches back and
forth between the last two channels that were
tuned.
tuned.
Using SurfLock
™
The SurfLock
™
feature temporarily memorizes one
channel to the
button, so you can return to it
quickly, but one time only, from any other channel with
. This feature also works for external inputs.
To memorize a channel to the
button:
1
Tune the channel you want to program into the
button.
2
Press and hold
for about 2 seconds until the
message “Memorized” appears. The channel has
been programmed to the
been programmed to the
button.
3
You can then change channels repeatedly, and
when you press
when you press
, the memorized channel will
be tuned.
After pressing
and then changing channels again,
the memory is cleared and the button functions as
Channel Return.
Channel Return.
Selecting the video input to view
To select the video input to view:
1
Press + on the remote control or TV control panel.
2
Change the input:
•
Press 0–8.
•
Repeatedly press B or b. Press
.
•
Repeatedly press +.
Note:
• You can label the video input sources according to the
• You can label the video input sources according to the
specific devices you have connected to the TV
(- “Labeling video inputs” on p. 30).
(- “Labeling video inputs” on p. 30).
• You can skip sources (- “Skipping video inputs” on p.
29).
• Inputs that are set to skip will be not available and will be
skipped over when selecting inputs by repeatedly
pressing + or B or b. They are only available by using
direct number entry.
pressing + or B or b. They are only available by using
direct number entry.
• If one or more REGZA-LINK
®
devices are connected to
an HDMI input, the REGZA-LINK
®
icon appears in the
input selector. In this case, the label (- p. 30) will not
appear in the input selector.
appear in the input selector.
• When the Auto Input feature is set, you can select a video
input source in the remote control by pressing and
holding the corresponding MODE SELECT button for 2
seconds (- p. 30).
holding the corresponding MODE SELECT button for 2
seconds (- p. 30).
To select a REGZA-LINK
®
device:
1
Press B or b to select a HDMI input.
2
Press c. The list of REGZA-LINK
®
devices for that
input appears.
3
If the input has multiple REGZA-LINK
®
devices,
use B or b to select a device.
4
Press .
O K
Inputs
ANT/CABLE
ANT/CABLE
0
1 Video 1
5 HDMI 2
6
HDMI 3
3
ColorStream HD1
HDMI 1
4
2 Video 2
REGZA-LINK
7
HDMI 4
8
PC
O K
VX700U_EN.pdf 33
2010/08/11 9:27:56
Get user manuals:
See SafeManuals.com