Toshiba W-727 Manuel D’Utilisation

VCR display

OFF:  if your DSS

®

 satellite receiver is

NON remote-controllable.
• Satellite channels will be selected by

the own channel selector of the DSS

®

satellite receiver.
The VCR channel should be set to the
output channel of the DSS

®

 satellite

receiver.

→

 Go to step 8.

Select “BRAND TYPE” using 

, and enter a brand code

of your DSS

®

 satellite receiver using 

.  Refer

to the table on the next page.

Example: For a TOSHIBA DSS

®

 satellite receiver, identified by

number 99.

Make sure that the background of the above display has changed to
the satellite program on channel 200.  If not, relocate the DSS

®

satellite receiver on the VCR so that it can receive the infrared signal.

 Press 

. twice to exit.

Notes
• If your satellite channel does not change to 200 in step 

, the DSS

®

 satetllite

receiver will not be able to change channels in the timer recording.  In this
case, set “CONTROL” to “OFF” in step 

.

• The VCR Plus+ C    system recording is not available on satellite channels.
• The DSS

®

 satellite receiver control is not compatible with the cable box

control.

TOSHIBA

99

RCA

98

SONY

97

PANASONIC

96

Once you complete the set-up for a remote
controllable DSS

®

 satellite receiver, your DSS

®

satellite receiver can be controlled by the
following buttons on the remote control of the
VCR.
•

POWER (CABLE BOX)
To turn the DSS

®

 satellite receiver on or off.

•

CH (CABLE BOX)
To select satellite channels in the upper or
lower direction. (not applicable to some brands
of DSS

®

 satellite receiver.)

•

Number buttons (0 – 9)
To select desired channels to record.

Brand name of your
DSS

®

 satellite receiver

Brand code

 3

®

W-727/Eng (24-39)

2/28/02, 4:00 PM

38