TP-LINK TL-WR 841 ND Manuel D’Utilisation

 

- 95 - 

 

Figure A-7  Basic Security 

1)  Because the WEB Server port 80 will interfere with the WEB management port 80 on the 

Router, you must change the WEB management port number to avoid interference. 

2)  To change the WEB management port number: Log in to the Router, click the “Security” 

menu on the left of your browser, and click "Remote Management" submenu. On the 

"Remote Management" page, type a port number except 80, such as 88, into the "Web 

Management Port" field. Click Save and reboot the Router. 

 

Figure A-8  Remote Management 

)

If the above configuration takes effect, configure to the Router by typing 192.168.0.1:88 
(the Router’s LAN IP address: Web Management Port) in the address field of the Web 
browser. 

3)  Log in to the Router, click the “Forwarding” menu on the left of your browser, and click 

the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New…, then 

on the “Add or Modify a Virtual Server” page, enter “80” into the blank next to the