Trimble Outdoors SPSX51 Manuel D’Utilisation

E     Real-Time Data and Services

160     SPSx51 Modular GPS Receivers User Guide

An RT17 service provides GPS observations, ephemerides, and other information, as 
defined for that service. When a “client” connects to the service, all data flow is from 
the receiver to the client.

You can configure RT17 output during the base and rover setup using the keypad and 
display. See 

.

You can configure RT17 output using the I/O Configuration menu of the web interface 
of the receiver. Configure the stream to allow multiple client connections on a single 
port, or restrict the stream to a single client connection. To allow only authorized 
connections on the port, protect the output stream by requiring a password. See 

If you interface to the receivers using binary commands over serial communications, 
you may need login authentication. This has been added to most receiver models that 
run firmware version 3.30 or later. 

If your utilities such as the WinFlash utility or the Configuration ToolBox software do 
not work with the receivers running firmware version 3.30 or later, go to the Trimble 
website and then download the latest versions of these utilities. If your own application 
software no longer communicates with the receiver, please contact Trimble Support 
for information about how to use the receiver in these cases.