Troy-Bilt TB110 Manuel D’Utilisation

Be sure no one other than the operator 

is standing near the lawn mower while starting 

engine or operating mower. Never run engine 

indoors or in enclosed, poorly ventilated areas. 

Engine exhaust contains carbon monoxide, an 

odorless and deadly gas. Keep hands, feet, hair and 

loose clothing away from any moving parts on 

engine and lawn mower.

Follow the set of instructions pertaining to your unit. Refer to 

engine manual for help with the engine.

1. 

Standing behind the mower, squeeze the blade control 

against upper handle. See Figure 5-1.

2. 

Holding these two handles together firmly, grasp recoil 

starter handle and pull rope out with a rapid, continuous, 

full arm stroke. See Figure 5-1. Keeping a firm grip on the 

starter handle, let the rope rewind slowly. Repeat until 

engine cranks. Let the rope rewind each time slowly.

1. 

Place the fuel valve lever found on the left side of the 

engine into the ON (OPEN) position. See Figure 5-2.

2. 

Move the choke lever all the way backward into the choke 

position.

3. 

Standing behind the mower, squeeze the blade control 

against upper handle. The choke will now begin to slowly 

return to the off choke position after activating the blade 

control. Therefore, quickly move onto step four below.

4. 

Holding these two handles together firmly, grasp recoil 

starter handle and pull rope out with a rapid, continuous, 

full arm stroke. See Figure 5-2. Keeping a firm grip on the 

starter handle let the rope rewind slowly. Repeat until 

engine cranks. Let the rope rewind each time slowly.

1. 

Release blade control to stop the engine and blade.

Wait for the blade to stop completely 

before performing any work on the mower or to 

remove the grass catcher.