Troy-Bilt TB2450 Manuel D’Utilisation

To adjust the position of the seat, pull up and hold the seat 

adjustment lever. Slide the seat forward or rearward to the 

desired position; then release the adjustment lever. Make sure 

seat is locked into position before operating the tractor. See  

Figure 3-5.

Before operating the tractor, make 

sure the seat is engaged in the seat-stop. Engage the 

parking brake. Stand behind the machine and pull 

back on seat until it clicks into place.

Before operating the tractor, make 

sure the seat is engaged in the seat-stop. Engage the 

parking brake. Stand behind the machine and pull 

back on seat until it clicks into place.

The fuel tank is located under the hood. Remove the fuel cap by 

turning it counterclockwise. Use only clean, fresh (no more than 

30 days old), unleaded gasoline. Do not overfill the tank.

Use extreme care when handling 

gasoline. Gasoline is extremely flammable and the 

vapors are explosive.  Never fuel the machine 

indoors or while the engine is hot or running. 

Extinguish cigarettes, cigars, pipes and other 

sources of ignition.

Be sure to STOP filling tank once fuel is seen 

inside the filler neck.  This ensures that a proper expansion 

volume is created.  Do NOT top off the tank. See Figure 3-6.

NOTE: Your tractor is shipped with oil in the engine. However, 

you MUST check the oil level before operating. 

Always check the engine oil level before 

each use as instructed in the Engine Owner’s 

Manual. Add oil as necessary. Failure to do so may 

result in serious damage to your engine.