Troy-Bilt Super Bronco Manuel D’Utilisation

4. 

Remove all dirt and clean the area around the transmission 

cover. See Fig. 7-3.

5. 

Remove the four hex screws (5⁄16-18 x .75) securing the 

transmission cover to the drive shaft and remove the cover. 

See Fig. 7-3 

6. 

Remove the left-side wheel. Tilt the left-side wheel shaft 

into a drain pan and allow the gear oil to drain through the 

top of the transmission.

7. 

Reinstall the wheel and reinstall the transmission cover. 

8. 

Refill the transmission using Mobil 1® Synthetic 75W 140. 

Refill the engine with motor oil and replenish the fuel tank 

with gasoline.

9. 

Reinstall the belt cover.