Troy-Bilt Super Bronco Manuel D’Utilisation

NOTE: This Operator’s Manual covers several garden tiller 

models. The tiller depicted may differ from yours.

To prevent personal injury or property 

damage, do not start the engine until all assembly 

steps are complete and you have read and 

understand the safety and operating instructions in 

this manual.

• 

Two 1⁄2” open-end wrenches

• 

Block of wood (to support tiller when removing wheels)

• 

Tire pressure gauge

• 

Clean oil funnel

• 

Motor oil. Refer to the Engine Operator’s Manual for oil 

specifications and quantity required.

NOTE: While unpacking, do not severely bend any of the control 

cables.
1. 

The tiller is heavy, do not attempt to remove it from 

the shipping platform until instructed to do so in these 

Assembly steps. 

2. 

Remove any packaging material from the carton. Remove 

any staples from the bottom of the carton and remove the 

carton from the shipping platform.

3. 

Remove all loose parts from the carton. Check that you 

have the items listed in the Contents of Carton list (contact 

your local dealer or the factory if items are missing or 

damaged). 

NOTE: All references to the right or left side of the tiller are from 

the operator’s position.
1. 

Remove two hex screws (5⁄16-18 x 1.50), two flange lock 

nuts (5⁄16-18), carriage bolt (5⁄16-18 x 6.75), bell washer (.326 x 

.875 x .145) and knob (5⁄16-18) from the lower handlebar and 

support brackets. See Fig. 3-1.

• 

One Tiller 

• 

One 20 oz. Bottle SAE 10W30 Oil

• 

One Handlebar Assembly

• 

One Operator’s Manual

• 

One Engine Operator’s Manual