BMW Part-No. 01 41 0 157 628 Manuel D’Utilisation
58
The belt cannot be extracted further.
Always observe the installation instruc-
tions provided by the manufacturer of
the child-restraint system.
Always observe the installation instruc-
tions provided by the manufacturer of
the child-restraint system.
To unlock the safety belt
Release the safety belt, remove the
child seat and retract the safety belt to
its end position on the belt retractor.
child seat and retract the safety belt to
its end position on the belt retractor.
LATCH child-restraint mounting
system
system
LATCH: Lower Anchors and Tether for
CHildren
CHildren
The left and right rear seats are both
equipped with a LATCH child-restraint
mounting system.
equipped with a LATCH child-restraint
mounting system.
Canadian models only:
The LATCH anchorage points are iden-
tified by buttons.
tified by buttons.
Remove the cover from the outside
anchorage by pulling forward. When
reinstalling ensure that the recess is on
the top.
anchorage by pulling forward. When
reinstalling ensure that the recess is on
the top.
With through-loading system: tilt the
backrest halfway forward to make the
cover easier to remove, refer to
page
backrest halfway forward to make the
cover easier to remove, refer to
page
Transporting children safely
Online Edition for Part-No. 01 41 0 157 628 - © 09/03 BMW AG