JVC HR-DD855EK Manuel D’Utilisation
34
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack.
recorded tape with a new soundtrack.
Audio Dubbing
Original sound
AUDIO OUT
Audio mixer
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO L + R
connectors on the recorder's front panel.
connectors on the recorder's front panel.
● When connecting monaural equipment, use only the
recorder's AUDIO L connector.
SET INPUT MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
appears in place of a channel number.
appears in place of a channel number.
LOCATE START POINT
3
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point
where you want to start dubbing.
recorder, and press PAUSE when you find the point
where you want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A. DUB.
● It is possible to take the original sound recorded on
the tape in your recorder and mix it with other
sounds from a microphone, CD player etc. To
perform this audio dubbing with audio mixing,
connect as in the diagram on the left.
sounds from a microphone, CD player etc. To
perform this audio dubbing with audio mixing,
connect as in the diagram on the left.
● Your recorder enters the Audio Dubbing Pause mode.
(" " blinks, " " and " " light up on the front display
panel.)
panel.)
● To perform audio dubbing with audio mixing, press
AUDIO on the remote control to select "
+ (L+R)"
at this point.
* Audio dubbing with audio mixing is not possible if
* Audio dubbing with audio mixing is not possible if
you're using a monaural audio component, or if
you don't have an audio mixer.
you don't have an audio mixer.
Audio-dubbed tape
CD Player etc.
Mixer
output
output
Pre-recorded tape
Normal audio track
Video/Hi-Fi audio
track
track
PLAY
PAUSE
A. DUB
CD Player etc.
STOP
TV PROG