Radio Shack 43-3821 Manuel D’Utilisation
T
e
lephone O
per
at
ion
15
/
'/14;
"&
+#.+0)
You can store up to 10 phone numbers in memory,
then dial a stored number by entering its memory
location number. You can also dial a number stored
in memory location number 1 by pressing
then dial a stored number by entering its memory
location number. You can also dial a number stored
in memory location number 1 by pressing
SPEED
DIAL
. Each number can be up to 16 digits.
5
614+0)
"
#
"0
7/$'4
"
+0
"/
'/14;
1. Lift the handset.
2. Press
MEMORY
. TALK/BATT blinks.
3. Enter the number and any tone or pause
entries (see “Using Tone Services on a Pulse
Line” on Page 14 and “Entering a Pause”).
Line” on Page 14 and “Entering a Pause”).
±
4. Press
MEMORY
again, then enter the memory
location number (
0
-
9
) where you want to store
the number. A tone sounds to indicate that the
number is stored.
number is stored.
To replace a stored number, simply store a new one
in its place. Or, lift the handset and press
in its place. Or, lift the handset and press
MEMORY
twice. Then press the memory location number (
0
-
9
) you want to clear. A tone sounds.
'
06'4+0)
"
#
"2
#75'
Some telephone systems require you to dial an
access code (9, for example) and wait for a second
dial tone before you can dial an outside number.
You can store the access code with the phone
number. However, you should also store a pause
after the access code to allow the outside line time
to connect.
access code (9, for example) and wait for a second
dial tone before you can dial an outside number.
You can store the access code with the phone
number. However, you should also store a pause
after the access code to allow the outside line time
to connect.
To enter a 2-second pause, press
RDL/PAUSE
. You
can add more pause entries for a longer pause.
&
+#.+0)
"
#
"/
'/14;
"0
7/$'4
To dial a number stored in memory, lift the handset
and press
and press
TALK
. TALK/BATT lights. When you hear
a dial tone, press
MEMORY
and enter the memory
location number for the number you want to dial.
±
±
"016'"
±
"
Storing a Number in
Memory
Memory
•
An error tone sounds
and the phone exits the
programming mode if
you wait more than 30
seconds between
keypresses.
and the phone exits the
programming mode if
you wait more than 30
seconds between
keypresses.
•
Each tone or pause
entry uses one digit of
memory.
entry uses one digit of
memory.
•
If you try to enter more
than 16 digits, the phone
beeps 5 times and exits
the programming mode.
Start over at Step 2 and
enter no more than 16
digits in Step 3.
than 16 digits, the phone
beeps 5 times and exits
the programming mode.
Start over at Step 2 and
enter no more than 16
digits in Step 3.
Dialing a Memory
Number
Number
If you select an empty
memory location, the phone
beeps 5 times.
memory location, the phone
beeps 5 times.
43-3821.fm Page 15 Friday, May 10, 2002 10:08 AM