ZyXEL Communications Vantage Service Gateway VSG-1200 V2 Manuel D’Utilisation
VSG-1200 V2 User’s Guide
225
Chapter 32 Using The SMT
In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen. To
return to the Main Menu screen, press 3.
return to the Main Menu screen, press 3.
Figure 171 SMT: Utilities Menu
32.9.1 Firmware Upgrade
Note: You MUST run a TFTP server on a computer where a firmware file is stored to
upgrade the firmware on the VSG.
You MUST have a WAN/LAN connection between the VSG and the TFTP
server computer at the same time.
server computer at the same time.
Follow the steps below to configure the TFTP settings in the SMT.
1 Connect the computer directly to the VSG through the console port. Refer to the section
on establishing a console port connection for more information.
2 In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen.
3 Type 1 and press [ENTER] to display the Firmware Upgrade screen.
4 Enter the IP address of the computer running the TFTP server in the TFTP Server IP
Address field.
5 Specify the name of the firmware file in the Download Filename field.
Figure 172 SMT: Firmware Upgrade
Utilities Menu
1)Firmware Upgrade
2)Change Password
3)Return to Main Menu
2)Change Password
3)Return to Main Menu
Enter selection:
Enter a numeric between 1 and 3.
Firmware Upgrade
TFTP Server IP Address :172.21.4.72
Download Filename :vsg1200v105.bin
Download Filename :vsg1200v105.bin
E)xecute Download R)eturn to Main Menu M)odify
Enter Selection:
Enter Selection:
Enter the command key and press enter.