ZyXEL Communications Vantage Service Gateway VSG-1200 V2 Manuel D’Utilisation
VSG-1200 V2 User’s Guide
Chapter 6 LAN and WAN Setup
66
6.5.4 WAN Port Mode: PPTP
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet.
networks, such as the Internet.
Username
Enter the user name exactly as assigned by your ISP.
If the name is assigned in the form user@domain where domain identifies a
If the name is assigned in the form user@domain where domain identifies a
service name, then enter both components exactly as given.
Password
Enter the password associated with the user name above.
PPP MTU Setting
Enter the size of a Maximum Transmission Unit (MTU).
TCP MSS Setting
Enter the size of the Maximum Segment Size (MSS).
Service Name
Enter the name of your PPPoE service.
Connect on Demand Select this option when you don’t want the connection up all the time and specify
an idle timeout in the Max Idle Time field (maximum 65535 minutes). This is the
default setting with an idle timeout of 10 minutes.
Keep Alive
Select this option when you want the Internet connection up all the time and
specify a redial period in the Redial Period field (maximum 65535 seconds).
When disconnected, the VSG will attempt to bring up the connection after the
redial period.
Table 8 System Settings: WAN/LAN: PPPoE (continued)
FIELD
DESCRIPTION