DataComm 45-0020-WH Fascicule
Recessed Commercial Grade Low Voltage
Cable Plate with 20 Amp Recessed Power
45-0020
Part #
UPC Code
Description
Min. Order/
Master Ctn.
45-0020-WH
660559007945
Recessed Commercial Grade Cable Plate with
20 Amp Recessed Power, White
20 Amp Recessed Power, White
1/20
Use DataComm Electronics patent
pending new Recessed Commercial
Grade Low Voltage Cable Plate with 20
Amp Recessed Power to install power
and low voltage cables behind your flat
panel TV, your amplifier or other audio
and video devices. The 45-0020
Recessed Commercial Grade Low
Voltage Cable Plate with 20 Amp
Recessed Power can be installed
upright or upside down.
Use either a single gang retrofit work
box (like the one shown in the picture) or
for new construction installations, use a
new nail on box. Once you have wired
the receptacle*, then begin by inserting
the receptacle portion of the plate into
the work box. Once the entire recessed
plate is flush to the wall, using the two
white screws supplied, screw the
receptacle portion of the plate to the
work box. Next, screw down the screws
with wings. These wings will fasten
tightly against the back of the drywall.
Plug in all necessary video and audio
cables. Install your flat panel TV
mounting bracket per the flat panel TV
bracket manufacturer’s instructions.
pending new Recessed Commercial
Grade Low Voltage Cable Plate with 20
Amp Recessed Power to install power
and low voltage cables behind your flat
panel TV, your amplifier or other audio
and video devices. The 45-0020
Recessed Commercial Grade Low
Voltage Cable Plate with 20 Amp
Recessed Power can be installed
upright or upside down.
Use either a single gang retrofit work
box (like the one shown in the picture) or
for new construction installations, use a
new nail on box. Once you have wired
the receptacle*, then begin by inserting
the receptacle portion of the plate into
the work box. Once the entire recessed
plate is flush to the wall, using the two
white screws supplied, screw the
receptacle portion of the plate to the
work box. Next, screw down the screws
with wings. These wings will fasten
tightly against the back of the drywall.
Plug in all necessary video and audio
cables. Install your flat panel TV
mounting bracket per the flat panel TV
bracket manufacturer’s instructions.
DataComm Electronics
6349 Peachtree St.
Norcross, GA 30071
888.223.7977
770.662.8205
770.662.8205
www.datacommelectronics.com
ETL LISTED
CONFORMS TO
UL STD 514C
CERTIFIED TO
CAN/CSA STD C22.2 NO. 42.1
3026001
U.S. Patent Numbers D553475, D554475
and 7390964
RoHS Compliant
* UR, UL Recognized Component
and 7390964
RoHS Compliant
* UR, UL Recognized Component