Juniper Dual-Port Synchronous Serial Physical Interface Module JX-2SERIAL-S Fiche De Données
Codes de produits
JX-2SERIAL-S
DATASHEET
1
Product Description
The Juniper Networks
®
Dual-port Synchronous Serial PIM provides the physical
connection to serial network media types, receiving incoming packets from the network
and transmitting outgoing packets to the network. The Dual-port Synchronous Serial
PIM is equipped with a dedicated network processor that forwards incoming data
packets to the Routing Engine, and receives outgoing data packets from the Routing
Engine. During this process, the PIM performs framing and line-speed signaling.
When the Dual-port Synchronous Serial PIM is installed in a ScreenOS-based
SSG Series security appliance, the dedicated network processor will forward traffic to
the SSG Series CPU where traffic decisions are made based upon security policies.
and transmitting outgoing packets to the network. The Dual-port Synchronous Serial
PIM is equipped with a dedicated network processor that forwards incoming data
packets to the Routing Engine, and receives outgoing data packets from the Routing
Engine. During this process, the PIM performs framing and line-speed signaling.
When the Dual-port Synchronous Serial PIM is installed in a ScreenOS-based
SSG Series security appliance, the dedicated network processor will forward traffic to
the SSG Series CPU where traffic decisions are made based upon security policies.
Features and Benefits
The Juniper Networks Dual-port Synchronous Serial PIM provides increased bandwidth
capabilities while making effective use of the J Series and SSG Series modular interface
slots. Features include:
capabilities while making effective use of the J Series and SSG Series modular interface
slots. Features include:
Single serial interface supporting RS232, V.35, X.21, RS449, and EIA530
•
Up to 8 Mbps per physical port
•
Onboard network processor
•
Clock rate configurable
•
Crypto resynchronization support
•
Juniper’s proprietary data terminal equipment (DTE) and data circuit-terminating
•
equipment (DCE) cables available for each protocol (10 in all) with auto-detection for
DTE/DCE modes
DTE/DCE modes
Product Overview
Dual-port Synchronous Serial
Physical Interface Module (PIM) is
for use with the Juniper Networks
J Series J2320, J2350, J4350, and
J6350 Services Routers, as well
as the Juniper Networks SSG140,
SSG320M, SSG350M, SSG520M and
SSG550M Secure Services Gateways.
Physical Interface Module (PIM) is
for use with the Juniper Networks
J Series J2320, J2350, J4350, and
J6350 Services Routers, as well
as the Juniper Networks SSG140,
SSG320M, SSG350M, SSG520M and
SSG550M Secure Services Gateways.
Dual-POrt SynchrOnOuS
Serial PhySical
interface MODule