ZyXEL Wireless Access Point G1000 91-005-124003B Manuel D’Utilisation

G-1000 User’s Guide

76

Chapter 8 Remote Management Screens

Figure 31   Remote Management: FTP

The following table describes the labels in this screen.

Simple Network Management Protocol (SNMP) is a protocol used for exchanging 
management information between network devices. SNMP is a member of the TCP/IP 
protocol suite. Your G-1000 supports SNMP agent functionality, which allows a manager 
station to manage and monitor the G-1000 through the network. The G-1000 supports SNMP 
version one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP 
management operation. SNMP is only available if TCP/IP is configured.

Note: SNMP is only available if TCP/IP is configured.

Table 27   Remote Management: FTP

Server Port

You may change the server port number for a service, if needed; however, you 

must use the same port number in order to use that service for remote 

management.

Server Access

Select the interface(s) through which a computer may access the G-1000 using this 

service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the G-

1000 using this service. 
Select All to allow any computer to access the G-1000 using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the G-1000 using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.