Philips Airfryer XL HD9240/30 HD9240/30 Manuel D’Utilisation

Never use the pan without the basket in it. If you heat up the appliance 

without basket, use oven gloves to open the drawer. The edges and inside 

of the drawer become very hot.
Caution: Do not touch the pan during and some time after use, as it gets 

very hot. 

 4 

 Press the timer increase or decrease button to set the timer to 

the required cooking time. See section ‘Settings’ in this chapter to 

determine the correct cooking time.  (Fig. 12)

 5 

 Press the START/STOP button to start the cooking process.  (Fig. 13)

 

, The display starts counting down the set cooking time. 

 

, Excess oil from the ingredients is collected on the bottom of the pan.

 6 

 When the appliance starts to beep, the set cooking time has elapsed. 

 7 

 Open the drawer by pulling at the handle and check if the  ingredients 

are ready.  (Fig. 14)

If the ingredients are not ready yet, simply slide the drawer back into the 

airfryer by the handle and add a few extra minutes to the set time.

 8 

 To remove small ingredients (e.g. fries), lift the basket out of the pan 

by the handle.  (Fig. 15)

After the cooking process, the pan, the basket and the ingredients are hot. 

Depending on the type of ingredients in the airfryer, steam may escape 

from the pan.

 9 

 Empty the basket into a bowl or onto a plate.  (Fig. 16)

 10 

 When a batch of ingredients is ready, the airfryer is instantly ready 

for preparing another batch. 

 11 

 Press the power on/off button to switch off the airfryer. 

You can program the appliance to prepare your favourite ingredients at a 

specific temperature for a specific length of time. 
Note: The appliance can only memorise one temperature and one cooking time. 

 1 

 Press the power on/off button to switch on the appliance.  (Fig. 6)

 2 

 Press the preset button (star symbol).  (Fig. 18)

 

, The display shows the current saved settings. 

 3 

 Press the temperature increase or decrease button to set the desired 

temperature.  (Fig. 7)

 

, The star symbol starts flashing.

 4 

 Press the timer increase or decrease button to set the desired 

time.  (Fig. 12)

 5 

 Press the preset button (star symbol).  (Fig. 18)

 

, You hear a beep and the star symbol lights up continuously to 

indicate that the settings have been saved. 

From now on, the appliance memorises your favourite settings. Just press 

the preset button to recall the saved settings. Press the START/STOP button 

to start the program. 
Note: If you want to change the saved settings, simply perform steps 1 to 5 again. 

The table below helps you to select the basic settings for the ingredients 

you want to prepare. 
Note: Keep in mind that these settings are indications. As ingredients differ in 

This Philips appliance complies with all standards regarding electromagnetic 

fields (EMF). If handled properly and according to the instructions in this 

user manual, the appliance is safe to use based on scientific evidence 

available today.

 1 

 Remove all packaging material. 

 2 

 Remove the foil from the control panel and any stickers or labels 

from the appliance.

 3 

 Open the drawer by pulling at the handle.  (Fig. 3)

 4 

 Remove the basket by lifting the handle (1). To remove the pan, tilt it 

backwards and lift it off the rails (2).  (Fig. 4)

 5 

 Thoroughly clean the basket and pan with hot water, some washing-

up liquid and a non-abrasive sponge. 

 6 

 Wipe the inside and outside of the appliance with a moist cloth.

 7 

 Place the pan in the drawer (1) and put the basket in the pan (2) (Fig. 5).

 8 

 Slide the drawer back into the airfryer by the handle.

 1 

 Place the appliance on a stable, horizontal and level surface.

Do not place the operating appliance on non-heat-resistant surfaces.
Do not place the operating appliance near or underneath objects that 

could be damaged by steam, such as walls and cupboards.

 2 

 Pull the mains cord out of the cord storage compartment at the back 

of the appliance.

This airfryer works on hot air. Do not fill the pan with oil, frying fat or 

any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and 

affects the hot air frying result.

The airfryer can prepare a large range of ingredients. The recipe booklet 

included helps you get to know the appliance. You can find more recipes at 

www.philips.com/kitchen. 

 1 

 Put the mains plug in an earthed wall socket.

 2 

 Press the power on/off button to switch on the appliance.  (Fig. 6)

 

, The display shows the last selected temperature. 

 3 

 Press the temperature increase or decrease button to set the 

required temperature. See section ‘Settings’ in this chapter to 

determine the right temperature.  (Fig. 7)

 4 

 Press the START/STOP button.  (Fig. 8)

 

, The appliance starts to heat up. 

 

, The set temperature flashes until the set temperature has been 

reached. Then the appliance beeps and the set temperature is 

displayed continuously. The appliance stops beeping if you set the 

required cooking time (see step 4 in section ‘Hot air frying’). 

 1 

 Open the drawer by pulling at the handle.  (Fig. 3)

 2 

 Put the ingredients in the basket (Fig. 10).

 3 

 Slide the drawer back into the airfryer by the handle (Fig. 11).