Gamber-Johnson 7170-0128 Fascicule
Rugged Dock
ing Sta
tions and
V
ehicle Moun
ts
Console System
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
1
2
4
5
6
3
7
Solution Components:
1. Leg Kit
(Item No. 7160-0084)
Leg Kit is a no-drill solution and attaches to the
passenger side seat studs.
Leg Kit is a no-drill solution and attaches to the
passenger side seat studs.
2. 29” Top Plate
(Item No. 7160-0085)
Top plate allows console box to be off set towards
the passenger for added space.
Top plate allows console box to be off set towards
the passenger for added space.
3. Ergonomic Console Box
(Item No. MCS-ERGOBOX12)
The Ergonomic Console Box can be mounted
towards the dash, creating added space for other
mounting equipment or easier passenger side
exit. Ergonomic design makes it easier to access
radios and siren controls. Console box comes with
standard faceplates and fi ller panels (full faceplates
must be ordered separately).
The Ergonomic Console Box can be mounted
towards the dash, creating added space for other
mounting equipment or easier passenger side
exit. Ergonomic design makes it easier to access
radios and siren controls. Console box comes with
standard faceplates and fi ller panels (full faceplates
must be ordered separately).
4. Pole System
(Item No. DS-LOWER-9 & 7160-0177)
Pole system includes the lower tube and the center
upper pole. Combined they allow the user to
ergonomically position the computer to fi t them
best.
Pole system includes the lower tube and the center
upper pole. Combined they allow the user to
ergonomically position the computer to fi t them
best.
5. 9” Locking Slide Arm - Mongoose
(Item No. 7160-0220)
Locking Slide Arm can rotate around 360°
with locking points every 15°. Slide Arm can
extend out from 9” to 13” from center pole and
locks automatically in the retracted 9” position.
Motion Attachment has tilt capabilities up to 90°
forward/30° backward and can be swiveled up to
360°.
Locking Slide Arm can rotate around 360°
with locking points every 15°. Slide Arm can
extend out from 9” to 13” from center pole and
locks automatically in the retracted 9” position.
Motion Attachment has tilt capabilities up to 90°
forward/30° backward and can be swiveled up to
360°.
6. Armrest
(Item No. MCS-ARMREST)
The Armrest is height adjustable for better
ergonomic positioning. The padded armrest fl ips
up to allow access to the console box or cupholder
if needed.
The Armrest is height adjustable for better
ergonomic positioning. The padded armrest fl ips
up to allow access to the console box or cupholder
if needed.
7. Accessories
(Item No. MCS-CUPHOLD2)
The cupholder mounts to the front of the console
box. It holds two cups and is compatible with most
cup sizes.
The cupholder mounts to the front of the console
box. It holds two cups and is compatible with most
cup sizes.
Extra Accessories:
Gamber-Johnson off ers a variety of extra
accessories for the console box including full
faceplates, LED lights, mic clips, cigarette adapter
kits and power distribution blocks. (These are not
included in the Packaged solutions, must order
separately).
accessories for the console box including full
faceplates, LED lights, mic clips, cigarette adapter
kits and power distribution blocks. (These are not
included in the Packaged solutions, must order
separately).
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: gamberj@gamberjohnson.com
Website: www.gamberjohnson.com
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: gamberj@gamberjohnson.com
Website: www.gamberjohnson.com
Item No. 7170-0128
Must order package as is. There are no substitutions.
Vehicle Solution Package:
Ford Expedition (2007-2013)
Ford Expedition (2007-2013)