ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Manuel D’Utilisation
Codes de produits
91-003-154001B
P-202H Plus v2 User’s Guide
Chapter 12 NetCAPI
142
12.3.1 Configuring the ZyXEL Device as a NetCAPI Server
This section describes how to configure your ZyXEL Device to be a NetCAPI server.
By default, NetCAPI is enabled on your ZyXEL Device. When NetCAPI is enabled, the
ZyXEL Device listens for incoming DCP messages from the computers. By default, the
ZyXEL Device listens for DCP messages on TCP port 2578.
ZyXEL Device listens for incoming DCP messages from the computers. By default, the
ZyXEL Device listens for DCP messages on TCP port 2578.
The following figure illustrates the configuration used in this example.
Figure 62 Configuration Example
Before entering any configurations, you must install the CAPI driver (RVS-CE) and
communication program such as RVS-COM Lite on your computer.
communication program such as RVS-COM Lite on your computer.
12.3.2 RVS-COM
RVS-COM includes an ISDN CAPI driver with its communication program. RVS-CE (Core
Engine) is an ISDN-CAPI 2.0 driver for Windows 95/98/NT that can be used by different
ISDN communication programs (such as AVM Fritz or RVS-COM) to access the ISDN on the
ZyXEL Device.
Engine) is an ISDN-CAPI 2.0 driver for Windows 95/98/NT that can be used by different
ISDN communication programs (such as AVM Fritz or RVS-COM) to access the ISDN on the
ZyXEL Device.
NetCAPI can carry out CAPI applications only if the CAPI driver is installed on your
computer. In addition to the CAPI driver, you will need a communication software program
such as RVS-COM Lite, Fritz etc., for users to access CAPI.
computer. In addition to the CAPI driver, you will need a communication software program
such as RVS-COM Lite, Fritz etc., for users to access CAPI.
The ISDN router is a shared device and can be used by several different client workstations at
the same time: e.g. one computer sending a fax, another computer doing a file transfer. RVS-
COM has to be installed on each client workstation in order to share the ISDN lines.
the same time: e.g. one computer sending a fax, another computer doing a file transfer. RVS-
COM has to be installed on each client workstation in order to share the ISDN lines.
End IP
Enter the last IP address in a NetCAPI client group.
Operation
Select Incoming if you wish to grant incoming calls permission. Select Outgoing if
you wish to grant outgoing calls permission. Select Both if you wish to grant both
incoming calls and outgoing calls permissions. Select None if you wish to deny all
calls.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 44 NetCAPI
LABEL
DESCRIPTION