Gamber-Johnson PocketJet 7160-0126 Fascicule

Secures to the 

Rack-to-Post Platform (Item 

No. DS-74 or DS-74-L)

, then secured to any 

, 

 with a welded pole 

or onto any fl at stable surface

Printer/Paper Roll 

Housing with bolt-

on Cable Strain 

Relief

2.34 lbs

3.25”

12.25”

5.25”

Holds printer & paper roll in 

separate trays

Cable strain relief protects 

connector interface on the 

printer engine from damage

•  Heavy gauge steel construction for long-term durability
•  Black powdercoat fi nish for maximum corrosion resistance
•  For use with the following Brother printers:

• PocketJet 200
• PocketJet 3
• PocketJet 6

•  Mount holds printer and paper roll in separate trays
•  New wire draw latch provides a secure fi t to reduce vibration noise
•  Bolt-on cable restraint provided a cable management options if desired
•  There is no drilling required if mounting to a 

Rack-to-Post Platform (Item No. DS-74 or DS-74-L)

, otherwise drilling 

is required for most other applications

•  Can be mounted to 

Motion Attachment (Item No. 7160-0419 (CLEVIS))

 and is attached using the PEM layout on 

the bottom of the mount

•  Paper roll is enclosed to protect from prolonged exposure to direct sunlight
•  Paper roll cut-out allows for vertical orientation as well as standard horizontal orientation
•  Printer can be easily removed from the mount for use outside of the vehicle
•  Paper and printer not included

Item No. 

W

D

H

• PocketJet II
•  PocketJet 3 Plus
•  PocketJet 6 Plus (NiMH battery only)

3001 Borham Ave.  |  Stevens Point, WI  54481, USA

Phone: 715.344-3482  |  Toll-free: 800.487-9220  |  Fax: 715.344-5209

Email: gamberj@gamberjohnson.com | Website: www.gamberjohnson.com

This  document, including images, may not be reproduced partly or fully without the expressed written 
consent of Gamber-Johnson’s Marketing Department. © Copyright  2012 Gamber-Johnson LLC

BROTHER POCKETJET SERIES MOUNT

BROTHER POCKETJET SERIES MOUNT