Gamber-Johnson Underbody Support Plate 7160-0190 Fascicule
Codes de produits
7160-0190
Placement
Seat
Confi gurations
Drilling Required
Weight
Height
Width
Depth
Under the vehicle
All
Yes
4.91 lbs
0.52”
8.0”
8.0”
Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat fi nish for maximum corrosion resistance
• Underbody support plate provides greater stability to the DS-52 and distributes the clamping load across the
• Black powdercoat fi nish for maximum corrosion resistance
• Underbody support plate provides greater stability to the DS-52 and distributes the clamping load across the
vehicle body
• Underbody support plate can be installed with two confi gurations:
• Bolts with threads up (plate will remain in fi xed position if the vehicle base is removed)
• Bolts with threads down (plate will disengage when the vehicle base is removed)
• Bolts with threads down (plate will disengage when the vehicle base is removed)
• PEM studs are used in order to reduce installation time and can be installed by a single individual
• Holes in center of plate allows installer to thread twine or wire and pull plate up to the underbody
• Holes in center of plate allows installer to thread twine or wire and pull plate up to the underbody
Important Notice:
Before drilling holes through a vehicle fl oor pan, inspect the drill locations for wiring, exhaust pipes, drive
train components, fuel lines and hydraulic lines.
Item No.
7160-0190
W
D
H
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: gamberj@gamberjohnson.com | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
UNDERBODY SUPPORT PLATE
UNDERBODY SUPPORT PLATE
(FOR USE WITH DS-52 VEHICLE BASE ONLY)
(FOR USE WITH DS-52 VEHICLE BASE ONLY)
(FOR USE WITH DS-52 VEHICLE BASE ONLY)