US Robotics USR4500-RMK Fascicule
1
rev 0.0 2/13
© 2013 U.S. Robotics Corporation
Rack Mount Kit Installation Guide
● Insert and tighten screws until the RMK chassis is secure in the rack.
USR4500-RMK 3-Unit Tap Rack Mount
Package Contents:
● USR4500-RMK 3-Unit Tap Rack Mount
● Package of 10 cable tie downs
● Information card
● Package of 10 cable tie downs
● Information card
Introduction
— The RMK (Rack Mount Kit) is a high quality, space saving rack mount chassis used with
multiple USRobotics 5” x 5” TAP devices for a neat, orderly and professional installation. Typically, the RMK
chassis is installed where access with monitoring and analysis capabilities are important.
chassis is installed where access with monitoring and analysis capabilities are important.
USR4500 RMK (3 Tap Unit) Specifications:
● Occupies 1U of rackspace
● 5” x 5” TAP Device Capacity: Three
● Dimensions H x W x D: 1.725” x 19.000” x 6.250; 44 mm x 483 mm x 159 mm
● Weight: Chassis - 3 pounds; 1.36 kg: Shipping - 6 pounds; 2.72 kg
● 5” x 5” TAP Device Capacity: Three
● Dimensions H x W x D: 1.725” x 19.000” x 6.250; 44 mm x 483 mm x 159 mm
● Weight: Chassis - 3 pounds; 1.36 kg: Shipping - 6 pounds; 2.72 kg
RMK Installation
— You may choose to insert TAP device(s) before or after RMK chassis installation.
● Select a location and align the RMK chassis holes with the corresponding rackspace holes.
WARNING
: Installing on a universal flange middle hole will result in the RMK chassis invading an adjoining
standard 1U rackspace.