Cisco C7200-JC-PA C7200-JC-PA= Fiche De Données
Codes de produits
C7200-JC-PA=
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
Cisco 7200VXR Series Port Adapter Jacket Card
Product Overview
Increasingly, business applications and services affect aggregation requirements and router-
integrated services across the WAN and metropolitan-area network (MAN)-in both the branch and
headquarters. Consequently, to continue to meet the increasing needs of flexibility, capacity, and
performance and maintain exceptional value and flexibility, Cisco Systems
®
introduces the Cisco
®
7200VXR Series Port Adapter Jacket Card (Figure 1). The jacket card addresses the demand for
additional slot density and flexibility by enabling the I/O slot to hold a single port adapter for
additional capacity on systems with the Cisco 7200VXR Series NPE-G1 Network Processing
Engine and above. Benefits of the jacket card include the following (refer to Table 1 for details):
●
Provides one additional slot for single port adapter (selected port adapter)
●
Allows a high-bandwidth port adapter-such as the hardware based security encryption
module SA-VAM2+ and the 2-Port Packet/SONET OC3c/STM1 Port Adapter-to be moved
onto a dedicated Peripheral Component Interconnect (PCI) bus that the Cisco NPE-G1 or
NPE-G2 provides
●
Reduces PCI contention among other port adapters
●
Provides a cost-effective way to increase the slot density in parallel to the increased
switching capacity of the newest engine of the platform-the Cisco NPE-G2
Figure 1. Cisco 7200VXR Series Port Adapter Jacket Card
Table 1.
Features and Benefits Overview
Features
Benefits
Additional Port
and Slot Density
and Slot Density
Increases the slot capacity of the chassis by 1 slot for single additional port adapter
Dedicated PCI Bus
Allows a high-bandwidth port adapter to be moved into the I/O slot, saving up to 3 port adapter slots
Port Adapter
Support
Support
High bandwidth point Port- and Service Adapter support offered: Cisco VPN Acceleration Module 2 (SA-
VAM2), VPN Acceleration Module 2+ with AES wide key crypto card (SA-VAM2+), 2-Port
Packet/SONET OC3c/STM1 Port Adapter (PA-POS-2OC3), 2-Port T3 Serial Port Adapter Enhanced
(PA-MC-2T3+), 1-Port multichannel STM-1 multi- and single mode port adapter (PA-MC-STM-1MM,
PA-MC-STM-1SMI) as well as the PA-A3 and PA-A6 ATM port adapters.
VAM2), VPN Acceleration Module 2+ with AES wide key crypto card (SA-VAM2+), 2-Port
Packet/SONET OC3c/STM1 Port Adapter (PA-POS-2OC3), 2-Port T3 Serial Port Adapter Enhanced
(PA-MC-2T3+), 1-Port multichannel STM-1 multi- and single mode port adapter (PA-MC-STM-1MM,
PA-MC-STM-1SMI) as well as the PA-A3 and PA-A6 ATM port adapters.
LED Indicators
"Pwr" LED indicates whether the jacket card is powered up; "Enabled" LED indicates whether it is
discovered by the system and its readiness
discovered by the system and its readiness
Online Insertion
and Removal (OIR)
and Removal (OIR)
Allows the port adapter to be removed or inserted into the jacket card without rebooting the router; the
jacket card, on the other hand, should not be removed unless the system is powered down
jacket card, on the other hand, should not be removed unless the system is powered down
Product Highlights
Supported Network Processing Engines