Bosch ISW-BIT1-HAX WLSN INSTALLATION F.01U.001.830 Manuel D’Utilisation
Codes de produits
F.01U.001.830
Intrusion Alarm Systems | wLSN Installation Tool
wLSN Installation Tool
www.boschsecurity.com
u
Powered by rechargeable batteries
u
Docking stations provide power source (6 VDC to
14 VDC) for battery recharging
14 VDC) for battery recharging
u
Externally-visible LED indicates charging status
u
Battery saving mode
u
Displays low-battery status
The wLSN Installation Tool is an alphanumeric liquid
crystal display (LCD) keypad that works with the
wLSN Hub to assist the installer in evaluating the
suitability of a particular site for the installation of
wireless devices and for verifying the acceptability of
specific locations for the placement of wireless
devices. The installation tool has a two-line, 16-
character text display and a sounder. The installation
tool also has a green LED for indicating battery
charging status. The installation tool comes with a
plug-in transformer and two docking stations: one for
wall mounting; the other is a desktop cradle.
crystal display (LCD) keypad that works with the
wLSN Hub to assist the installer in evaluating the
suitability of a particular site for the installation of
wireless devices and for verifying the acceptability of
specific locations for the placement of wireless
devices. The installation tool has a two-line, 16-
character text display and a sounder. The installation
tool also has a green LED for indicating battery
charging status. The installation tool comes with a
plug-in transformer and two docking stations: one for
wall mounting; the other is a desktop cradle.
Functions
Diagnostic Modes
Use the wLSN Installation Tool as a pre-installation
tool for determining the suitability of a particular site
for wireless applications or to validate individual
device RF performance prior to permanent mounting.
In other words, the wLSN Installation Tool provides
assurance that a device installed at the chosen
location can communicate reliably with the wLSN Hub.
The wLSN Installation Tool has three user-selectable
modes:
tool for determining the suitability of a particular site
for wireless applications or to validate individual
device RF performance prior to permanent mounting.
In other words, the wLSN Installation Tool provides
assurance that a device installed at the chosen
location can communicate reliably with the wLSN Hub.
The wLSN Installation Tool has three user-selectable
modes:
1. Go/No Go: indicates whether or not the tool is
receiving a signal from the wLSN Hub of sufficient
strength to ensure reception by a wireless device
located at that site
strength to ensure reception by a wireless device
located at that site
2. Packet Success Rate: indicates signal strength by the
number of bars shown and the number of packets
received by the tool (three packets are sent from the
wLSN Hub every four seconds). The best location for
placing a device is the one showing the highest
number of bars and packets received.
received by the tool (three packets are sent from the
wLSN Hub every four seconds). The best location for
placing a device is the one showing the highest
number of bars and packets received.
3. Signal-to-Noise Ratio: provides separate readings for
received signal strength, ambient noise level, and
signal-to-noise ratio. The higher the signal-to-noise-
ratio; the better the location.
signal-to-noise ratio. The higher the signal-to-noise-
ratio; the better the location.
Fixed Operation
When placed into a docking station, the wLSN
Installation Tool is powered from the docking station
through a cable and wall transformer. While the tool is
in the docking station, the batteries are automatically
recharged. The green status LED on the tool indicates
the charging status of the batteries whenever the tool
is in the docking station:
Installation Tool is powered from the docking station
through a cable and wall transformer. While the tool is
in the docking station, the batteries are automatically
recharged. The green status LED on the tool indicates
the charging status of the batteries whenever the tool
is in the docking station:
• Continuously on indicates fully-charged batteries
• Slow flashing indicates batteries are being recharged
• Off indicates the installation tool is not connected to
• Slow flashing indicates batteries are being recharged
• Off indicates the installation tool is not connected to
the recharging circuit