Philips Pocket projector PPX3610 PPX3610/EU Manuel D’Utilisation
Codes de produits
PPX3610/EU
Connect to the Playback Device
17
Connecting using
Component-Video (YPbPr/
YUV) Cable
Component-Video (YPbPr/
YUV) Cable
Please use this type of connection to obtain the highest
possible image quality. This cable is available as an acces-
sory. The device jacks have the colours green (Y), blue
(U/Pb), red (V/Pr) for the video signal and red (audio
right) and white (audio left) for the audio signal.
possible image quality. This cable is available as an acces-
sory. The device jacks have the colours green (Y), blue
(U/Pb), red (V/Pr) for the video signal and red (audio
right) and white (audio left) for the audio signal.
VGA
Y-Pb-Pr
HDMI
1 Connect the video component cable (accessory) to
the projector's HDMI socket.
2 Connect the video device's appropriate coloured
sockets to the component video cable of the projec-
tor using a conventional component video (RCA)
cable.
tor using a conventional component video (RCA)
cable.
YCbCr
Note that the YPbPr outlets are labelled
YCbCr on some devices.
YCbCr on some devices.
Two Red Phono (RCA) Connectors
When connecting, note that there are two
red phono (RCA) connectors on the cable.
One is for the right audio signal and the
other for the V/Pr element of the compo-
nent video signal. If these two connectors
are inserted incorrectly, the projected
image appears green and the audio signal
for the right speaker will not work.
red phono (RCA) connectors on the cable.
One is for the right audio signal and the
other for the V/Pr element of the compo-
nent video signal. If these two connectors
are inserted incorrectly, the projected
image appears green and the audio signal
for the right speaker will not work.
3 Select Menu > Source and switch to Component.
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
VGA
Y-Pb-Pr
HDMI
Switching to the Multimedia Device Sig-
nal Output
nal Output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
to find out how to switch the signal output to
this jack.
Directly Connecting
Projector to Computer using
WLAN (WiFi Streaming)
Projector to Computer using
WLAN (WiFi Streaming)
With the software PicoPixWlink you can connect the
projector to a computer or a laptop over your wireless
network. For this purpose, both devices must be con-
nected to the same wireless network.
projector to a computer or a laptop over your wireless
network. For this purpose, both devices must be con-
nected to the same wireless network.
1 Install the PicoPixWlink software (allready pre
2 Connect the device with the wireless network (see
3 Start PicoPixWlink (PicoPix Viewer) on your com-
puter.
4 Click the PicoPixWlink icon in the notification area
and start the manager window.
You are now able to search for projectors in the net-
work (Search WIFI projector) and start the projection
(Start projection).
work (Search WIFI projector) and start the projection
(Start projection).
Notice
Notice
Notice