Teldat bintec R1202 5510000210 Manuel D’Utilisation
Codes de produits
5510000210
bintec R1202
29.10.2013
Subject to technical alterations
Page 3 / 10
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
As a result, there is not only more bandwidth available, but there is the opportunity to spread
data traffic across individual WAN connections according to load or data type. Equally, you can
use a connection (e.g. SDSL) for the VPN connection of branch offices and external sales staff
and use a second WAN port for a low-cost ADSL connection to guarantee the company's other
data traffic.
Our bintec router redundancy protocol (BRRP) allows two devices to be operated so that they act
as a single device in the LAN. Both devices have their own IP and MAC addresses for each
interface as well as a joint virtual IP and MAC address. This is registered as the standard gateway
for all computers in the LAN. Both of the switched gateways communicate over the bintec
protocol and if either device fails, the other device automatically takes over the entire data
traffic.
data traffic across individual WAN connections according to load or data type. Equally, you can
use a connection (e.g. SDSL) for the VPN connection of branch offices and external sales staff
and use a second WAN port for a low-cost ADSL connection to guarantee the company's other
data traffic.
Our bintec router redundancy protocol (BRRP) allows two devices to be operated so that they act
as a single device in the LAN. Both devices have their own IP and MAC addresses for each
interface as well as a joint virtual IP and MAC address. This is registered as the standard gateway
for all computers in the LAN. Both of the switched gateways communicate over the bintec
protocol and if either device fails, the other device automatically takes over the entire data
traffic.
Simple configuration and maintenance
The gateway is configured over the Configuration Interface (FCI), using the integrated
configuration wizards for example. The FCI is a web-based graphic user surface that you can use
from any PC with an up-to-date Web browser via an HTTP or encrypted HTTPS connection. It also
offers the opportunity to manage the devices locally and remotely over other configuration
accesses such as Telnet, SSH and ISDN login.
The gateway is configured over the Configuration Interface (FCI), using the integrated
configuration wizards for example. The FCI is a web-based graphic user surface that you can use
from any PC with an up-to-date Web browser via an HTTP or encrypted HTTPS connection. It also
offers the opportunity to manage the devices locally and remotely over other configuration
accesses such as Telnet, SSH and ISDN login.
In addition the R1202 offers the option of the Teldat WLAN Controller.
The Teldat WLAN Controller allows the configuration and monitoring of small and medium sized
WLANs with up to 72 access points.
Whether it is for frequency management which automatically determines the radio channels, for
the support of virtual LANs or for the management of virtual radio networks (Multi SSID)—the
WLAN Controller offers easy control over all advanced features. Our software continuously
monitors the entire wireless LAN and immediately reports outages and security risks.
The Teldat WLAN Controller allows the configuration and monitoring of small and medium sized
WLANs with up to 72 access points.
Whether it is for frequency management which automatically determines the radio channels, for
the support of virtual LANs or for the management of virtual radio networks (Multi SSID)—the
WLAN Controller offers easy control over all advanced features. Our software continuously
monitors the entire wireless LAN and immediately reports outages and security risks.
DIME Manager from Teldat is a free tool for managing Teldat devices.
DIME Manager is aimed at administrators who manage networks with up to 50 devices. The
software simplifies the management and configuration of gateways or access points either
individually or in logical groups.
When developing DIME Manager, simple and efficient operation was the primary aim. It allows,
for example, software updates to be applied to individual devices or groups of devices simply by
drag and drop. DIME Manager recognises and manages new devices in the network using SNMP
multicasts, in other words independent of their current IP address.
DIME Manager is aimed at administrators who manage networks with up to 50 devices. The
software simplifies the management and configuration of gateways or access points either
individually or in logical groups.
When developing DIME Manager, simple and efficient operation was the primary aim. It allows,
for example, software updates to be applied to individual devices or groups of devices simply by
drag and drop. DIME Manager recognises and manages new devices in the network using SNMP
multicasts, in other words independent of their current IP address.
Variants
bintec R1202 - UK (5510000262)
VPN Gateway; 19 inch rack; 1x ISDN BRI; incl. 10 IPSec tunnels (opt. max. 110),
certificates, HW encryption; 4+1 Gigabit Eth. switch; UK version.
certificates, HW encryption; 4+1 Gigabit Eth. switch; UK version.
bintec R1202 (5510000210)
VPN Gateway; 19 inch rack; 1x ISDN BRI; incl. 10 IPSec tunnels (opt. max. 110),
certificates, HW encryption; 4+1 Gigabit Eth. switch; german and intern. version.
certificates, HW encryption; 4+1 Gigabit Eth. switch; german and intern. version.
Features
ISDN
CAPI
CAPI 2.0 with CAPI user concept (password for CAPI use)