HP FlexFabric 11908-V JG608A Manuel D’Utilisation

Codes de produits
JG608A
Page de 27
 
Models
HP FlexFabric 11908-V Switch Chassis
JG608A
Key features
High-performance CLOS-based switching architecture
Large layer 2 scaling with TRILL and HP IRF
Feature-rich routing with IPv4/IPv6, MPLS, and QoS
Enhanced modularity with control and data plane separation
High 10GbE and 40GbE density; 100GbE ready across 7.7 Tb/s switch fabric
Product overview
The HP FlexFabric 11900 Switch Series is a high-performance data center aggregation switch that provides line-rate, high-density
10GbE and 40GbE connectivity designed for cost-effective end-of-row (EoR) and small core deployments.
With latency as low as 3 ìs, the HP FlexFabric 11900 Switch Series can scale to 384 1/10GbE, 192 1/10GBASE-T or 64 40GbE ports. The
switch delivers up to 7.7 Tb/s switching capacity and 5.8 Bpps forwarding throughput. A broad variety of interface options is available,
including 1/10GbE, 1/10GBASE-T and 40GbE.
Ready for software-defined networking (SDN), the switch supports full Layer 2 and 3 features, including advanced features such as
TRansparent Interconnection of Lots of Links (TRILL) and Intelligent Resilient Framework (IRF), which provides the ability to build large,
resilient switching fabrics. The HP FlexFabric 11900 Switch Series also supports fully redundant and hot-swappable components to
complement its other enterprise-class capabilities.
Features and benefits
Data center optimized
Scalable Layer 2 fabrics
builds flexible, resilient and scalable Layer 2 fabrics with TRILL together with HP IRF
NEW Multitenant Device Context (MDC)
virtualizes a physical switch into multiple logical devices, with each logical switch having its own processes, configuration, and
administration
Data Center Bridging (DCB) protocols
supports IEEE 802.1Qaz Data Center Bridging Exchange (DCBX) and Enhanced Transmission Selection (ETS) and IEEE 802.1Qbb
Priority Flow Control (PFC) for converged fabrics
Fibre Channel over Ethernet (FCoE) capabilities
delivers support for FCoE, including expansion, fabric, trunk VF and N ports, and aggregation of E-port and N-port virtualization
Edge Virtual Bridging (EVB) with Virtual Ethernet Port Aggregator (VEPA) support
provides connectivity into the virtualization-ready data center environment
Front-to-back airflow design
accomodates deployment in data centers utilizing hot-cold aisles
Performance
High-performance fully-distributed architecture
QuickSpecs
HP FlexFabric 11900 Switch Series
Overview
DA - 14585   Worldwide — Version 6 — March 31, 2014
Page  1