Emulex Single Channel 2Gb/s Fibre Channel PCI-X HBA LP9802-X2 LP9802-X2 Fascicule
Codes de produits
LP9802-X2
STANDARDS
ANSI Fibre Channel FC-FS
ANSI Fibre Channel FC-FS
ANSI Fibre Channel FC-PH
ANSI Fibre Channel FC-PI
ANSI Fibre Channel FC-AL
ANSI Fibre Channel FC-PLDA
ANSI Fibre Channel FC-MI
ANSI Fibre Channel FC-FLA
PCI-X 1.0a
PCI local bus revision 2.2 (see power requirements)
Fibre Channel Class 2, 3
PHP hot plug - hot swap
ARCHITECTURE
Emulex Pegasus ASIC technology
Emulex Pegasus ASIC technology
up to 133MHz PCI-X DMA
2Gb/s or 1Gb/s FC Link
2MB FLASH memory
2MB QDR SRAM
SOFTWARE ENVIRONMENTS
Windows Server 2003
Windows Server 2003
Windows 2000
Windows NT
HP-UX
Linux
NetWare
Solaris
HARDWARE ENVIRONMENTS
x86, SPARC and PowerPC PCI hardware platforms
x86, SPARC and PowerPC PCI hardware platforms
3.3V signaling, 5V tolerant
32/64b 33/66MHz PCI
66/100/133MHz PCI-X
PHYSICAL DIMENSIONS
Short low profile MD2 form factor
Short low profile MD2 form factor
Low profile or standard bracket
167.64mm x 64.42mm (6.60" x 2.54")
167.64mm x 64.42mm (6.60" x 2.54")
OPTICAL
Data rates: 1.0625/2.125Gb/s
Data rates: 1.0625/2.125Gb/s
Optics: short/long wave lasers
Cable: 9/125µm single-mode fiber
50/125µm multi-mode fiber
62.5/125µm multi-mode fiber
62.5/125µm multi-mode fiber
Connector: LC
Distance: (1Gb/s)
10K meters (32,800') 9/125 µm fiber
500 meters (1,640') 50/125 µm fiber
300 meters (984') 62.5/125 µm fiber
500 meters (1,640') 50/125 µm fiber
300 meters (984') 62.5/125 µm fiber
(2Gb/s)
10K meters (32,800') 9/125 µm fiber
300 meters (984') 50/125 µm fiber
150 meters (492') 62.5/125 µm fiber
10K meters (32,800') 9/125 µm fiber
300 meters (984') 50/125 µm fiber
150 meters (492') 62.5/125 µm fiber
POWER REQUIREMENTS
Volts: +3.3 VDC (± 5%)
Volts: +3.3 VDC (± 5%)
Power: 7.7 watts @ 66MHz,
8.5 watts @ 133MHz (typ)
ENVIRONMENTAL CONDITIONS
Operating temperature: 0° to 45°C (32° to 113°F)
Operating temperature: 0° to 45°C (32° to 113°F)
Airflow required: 100 lf/m
Storage temperature: -40° to 70°C (-40° to 158°F)
Relative humidity: 5% to 95% non-condensing
AGENCY APPROVALS
Class 1 Laser Product per
DHHS 21CFR (J) & EN60825
Class 1 Laser Product per
DHHS 21CFR (J) & EN60825
UL recognized to UL 1950
CUR recognized to CSA22.2, No. 950
TUV certified to EN60950
FCC rules, Part 15, Class A
ICES–003, Class A
EMC Directive 89/336/EEC (CE Mark)
- EN55022, Class A
- EN55024
- EN55022, Class A
- EN55024
Australian EMC Framework (C–Tick Mark)
- AS/NZS 3548, Class A
- AS/NZS 3548, Class A
VCCI, Class A
DRIVER SUPPORT
A rich suite of software complements the LP9802. Some
examples of the features included are, LUN Masking,
LUN Mapping, Persistent Binding, I/O Coalescing,
full fabric boot in both x86 and Sparc environments
as well as support for multi or simultaneous protocol
(SCSI & IP) operation. In addition, most drivers
include a full-featured implementation of the FC-MI
HBA Management Interface. These features enable
advanced storage area network (SAN) implementations
in Windows Server 2003, Windows 2000, Windows NT,
Linux, HP-UX, Solaris and NetWare environments.
All drivers are also fully compatible with the Emulex
LP10000, LP9002L, LP8000, LP7000E, LP9402DC,
and LP9002C host bus adapters. Windows, Linux and
NetWare drivers are also compatible with the LP1050,
LP850, LP952L and LP982.
A rich suite of software complements the LP9802. Some
examples of the features included are, LUN Masking,
LUN Mapping, Persistent Binding, I/O Coalescing,
full fabric boot in both x86 and Sparc environments
as well as support for multi or simultaneous protocol
(SCSI & IP) operation. In addition, most drivers
include a full-featured implementation of the FC-MI
HBA Management Interface. These features enable
advanced storage area network (SAN) implementations
in Windows Server 2003, Windows 2000, Windows NT,
Linux, HP-UX, Solaris and NetWare environments.
All drivers are also fully compatible with the Emulex
LP10000, LP9002L, LP8000, LP7000E, LP9402DC,
and LP9002C host bus adapters. Windows, Linux and
NetWare drivers are also compatible with the LP1050,
LP850, LP952L and LP982.
ORDERING INFORMATION
LP9802–F2
embedded multi-mode optic interface (LC)
LP9802–F2
embedded multi-mode optic interface (LC)
LP9802–X2
embedded single-mode optic interface (LC)
embedded single-mode optic interface (LC)
This document refers to various companies and products by their trade
names. In most, if not all cases, their respective companies claim these
designations as trademarks or registered trademarks. This information is pro-
vided for reference only. Although this information is believed to be accurate
and reliable at the time of publication, Emulex assumes no responsibility for
errors or omissions. Emulex reserves the right to make changes or corrections
without notice.
names. In most, if not all cases, their respective companies claim these
designations as trademarks or registered trademarks. This information is pro-
vided for reference only. Although this information is believed to be accurate
and reliable at the time of publication, Emulex assumes no responsibility for
errors or omissions. Emulex reserves the right to make changes or corrections
without notice.
SPECIFICATIONS
LP9802
LightPulse™
2Gb/s Fibre Channel PCI-X Host Bus Adapter
www.emulex.com
04-039/9/03
Corporate HQ 3535 Harbor Blvd Costa Mesa CA 92626 714 662.5600 | Wokingham U.K. (44) 118 977 2929 | Paris France (33) 41 91 19 90
LP9802
EM
UL
EX
®
LIGHTPULSE
™
2G
b/s
Fibre
Cha
nne
lP
CI-
X
2 GIG