Cisco CAB-U-RJ45= Manuel D’Utilisation

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Cabling Specifications
      Console
      Ethernet
      ISDN BRI U Interface
      ISDN BRI Cable Specifications
      ISDN S/T Interface for a downstream ISDN phone or fax
      WAN Interface Cards
      Front Panel LEDs
      Rear Panel LEDs
Related Information

This document provides the cabling specifications for the Cisco 1604−R Ethernet/ISDN−BRI Modular router.

There are no specific requirements for this document.

The information in this document is based on the hardware version:

Cisco 1604−R Router

• 

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

For more information on document conventions, see the Cisco Technical Tips Conventions.

The Cisco 1604−R router has one Ethernet interface, one Integrated Services Digital Network (ISDN)
interface, one ISDN phone port, and one ISDN−Basic Rate Interface (BRI) WAN interface card (WIC) slot.