APC NetBotz 320 Rack Appliance NBRK0320E Manuel D’Utilisation

the Advanced tab in the Thresholds pane:

– Specify a Return To Normal Delay value. Use the controls to specify the number of seconds 

that must pass after this threshold has returned to normal before the threshold state is considered 
returned to normal. Default value is 0 (state returns to normal immediately after the measured 
value is no longer violating the threshold). 

– Set an Advanced Schedule for this threshold (optional). By default, all thresholds are assumed to 

be enabled 24 hours a day, 7 days a week. However, you can specify that a threshold will be 
enabled only during specific time ranges. To set an Advanced Schedule:

a. Click Advanced Schedule.... The Schedule Threshold window opens.

b.By default, all time periods in the schedule are set to Enabled. To disable the threshold for a 

currently enabled period of time, highlight the period of time by clicking-and-dragging over the 
desired time range, and then click Disable. To enable the threshold for a currently disabled 
period of time, highlight the period of time by clicking-and-dragging over the desired time 
range, and then click Enable.

c. When you have finished creating your Advanced Threshold, click OK to save the schedule and 

return to the Thresholds task.

– Select an Alert Severity value for this threshold. Available Alert Severities are, in order of 

escalating severity: Information, Warning, Error, Critical, or Failure. By default, the Alert 
Severity generated by this threshold will be “Error.”

– Specify  the  Alert Profile that will be used to determine what alert notification actions will be 

taken in response to this threshold. By default, the Default Alert Profile is used for all thresholds. 
However, if you have created additional Alert Profiles you can specify that a threshold use an 
Alert Profile other than Default.

– Select Cameras to Trigger in response to the alert. If desired, alert notifications generated in 

response to this threshold can include image captures from any Camera Pod 120s connected to 
your appliance. To include images from one or more connected Camera Pod 120s, check the 
check boxes that correspond to the desired pods. 

– Specify a User-specified URL and User-specified Description. You can use these fields to 

include additional user-specific information with any alert notifications that are generated using 
this threshold. 

8. Click OK to save this threshold.

An alert state for time threshold is defined by specifying both a maximum time permitted value and the 
state which, if reported by the sensor, will cause an alert condition to be reported. If the state reported by 
the sensor is the specified state and the state remains unchanged for more than the specified maximum 
time permitted value an alert condition is reported. To define an alert state threshold:

1. Start the Camera Pods, Sensor Pods, or Device Crawlers task by double-clicking on the appropriate 

The Alert Profile drop box will appear in the Advanced tab only if additional 
Alert Profiles have been created. For more information see “Creating an Alert 
Profile” on page 63.