Intel SC5400BRP Manuel D’Utilisation
Intel® Server Chassis SC5400 5U Kit TPS
Chassis Features
Revision: 1.0
9
2.6 I/O
Panel
All input/output (I/O) connectors are accessible on the rear of the chassis. The SSI E-bay 3.5-
compliant chassis provides an ATX* 2.03-compatible cutout for I/O shield installation. Boxed
server boards provide the required I/O shield for installation in the cutout. The I/O cutout
dimensions are shown in the figure below.
compliant chassis provides an ATX* 2.03-compatible cutout for I/O shield installation. Boxed
server boards provide the required I/O shield for installation in the cutout. The I/O cutout
dimensions are shown in the figure below.
The rear I/O panel conforms to the Advanced Technology Extended (ATX) Specification,
Revision 2.1, and supports seven full-length expansion PCI adaptor cards.
Revision 2.1, and supports seven full-length expansion PCI adaptor cards.
I/O Aperture
Baseboard
Datum 0,0
5.196 ± 0.010
6.250 ± 0.008
1.750 ± 0.008
(0.650)
(0.150)
0.100 Min keepout around opening
R 0.039 MAX, TYP
Figure 5. ATX* 2.03 I/O Aperture
2.7 Standard and Optional Hot Swap Drive Bays
One fixed bay, supporting six cabled drives, ships with the standard chassis. A 4-drive bay for
cabled (fixed) drives is also available. Optional 4-drive and 6-drive hot swap bays are also
available and may be installed to replace either the 4-drive or 6-drive fixed bays. No tools are
required to replace the fixed drive bays.
cabled (fixed) drives is also available. Optional 4-drive and 6-drive hot swap bays are also
available and may be installed to replace either the 4-drive or 6-drive fixed bays. No tools are
required to replace the fixed drive bays.
Figure 6. Fixed Drive Cage