Cisco 4-Port Dedicated Token Ring Port Adapter PA-4R-DTR= Manuel D’Utilisation
Codes de produits
PA-4R-DTR=
Configuration Example
2
Cisco IOS Release 11.3(3)T
Enable Token Ring Concentrator Port
To enable an interface to operate as a concentrator port, perform the following task in interface
configuration mode:
configuration mode:
Monitor and Maintain the Port
To monitor the Token Ring Concentrator Port, perform one or more of the following tasks in EXEC
mode:
mode:
Configuration Example
The following example enables full-duplex mode on PA-4R-DTR interface 3/0/0, and configures the
interface to operate as a concentrator port:
interface to operate as a concentrator port:
router(config)# interface tokenring 3/0/0
router(config-if)# ip address 1.1.1.10 255.255.255.0
router(config-if)# full-duplex
router(config-if)# ring-speed 16
router(config-if)# port
router(config-if)# exit
router(config)#
Each PA-4R-DTR port adapter interface must be configured for the same ring speed as the ring to
which it is connected (either 4 or 16 Mbps). If the interface is set for a different speed, it will cause
the ring to beacon, which effectively brings the ring down and makes it inoperable.
which it is connected (either 4 or 16 Mbps). If the interface is set for a different speed, it will cause
the ring to beacon, which effectively brings the ring down and makes it inoperable.
Task
Command
Specify concentrator port operation.
port
Task
Command
Display internal state information about the Token
Ring interfaces in the system.
Ring interfaces in the system.
show controllers token
Provide high-level statistics for a particular
interface.
interface.
show interface token