Corsair 1GB XMS2-6400 DDR2 TWIN2X Matched Memory Pairs TWIN2X1024-6400C4 Fascicule
Codes de produits
TWIN2X1024-6400C4
X T R E M E P E R F O R M A N C E D D R 2 M E M O RY
www.corsairmemor y.com
toll free: 888-222-4346
international: 510-657-8747
toll free: 888-222-4346
international: 510-657-8747
The Twin2X1024-6400C4 is a 1GByte matched pair of DDR2 SDRAM DIMMs. This part delivers outstanding
performance in the latest generation of dual-channel DDR2-based motherboards. It has been tested extensively in
multiple DDR2 motherboards to ensure compatibility and performance at its rated speed. This memory has been
verified to operate at 800MHz at the low latencies of 4-4-4-12. The Twin2X1024-6400C4 comes with Enhanced
Performance Profiles (EPP), the open standard for performance module SPD’s jointly developed by Corsair and
NVIDIA. EPP SPD’s on Corsair modules allow users to automatically configure EPP enabled motherboards with
aggressive memory performance settings, for maximum memory and system performance.
T W I N 2 X 1 0 24 - 6 4 0 0 C 4
The Fine Print: Every part is tested in Corsair's factory at 800MHz, but your
actual results may vary depending on the overclocking margin of your CPU and
motherboard. Newer motherboards may be used for production test as they
become available. Corsair may periodically update the part with newer RAM
revisions of same or greater performance. RAM used on the module may change
without notice. © May 2006 Corsair Memory, Inc.
FEATURES
1024 Megabytes of DDR2 memor y
Two matched CM2X512-6400C4 modules
SPD includes Enhanced
Per formance Profiles (EPP) which
allow automatic overclock ing to
aggressive per formance settings
allow automatic overclock ing to
aggressive per formance settings
Implemented using 64M x 8 DDR2
SDRAMs
100% tested at 800MHz in high
per formance DDR2 motherboards
Legendar y Corsair reliabilit y and
ser vice
Lifetime warrant y
TEST SPECS
Each module pair is tested together at
800MHz
Tested and pack aged in pairs
Packaged together immediately following
system test
Tested at EPP SPD settings (4-4-4-12) at
2.1V
SPD programmed at:
JEDEC standard 5-5-5-18 values at
800MHz
EPP standard 4-4-4-12-2T, 2.1V values at
800MHz