Sanyo EDUCATION PROJECTOR PLC-XE31LMP PLC-XE31LMP Manuel D’Utilisation

To store the adjusted data, select "Store" and press the
SELECT button.  Select a level from Image 1 to 4 with the
Point  ed  buttons and press the SELECT button.  The
confirmation box appears and then select "Yes". 
Stored data can be called up by selecting "Image" in the
Image Level Selection on p. 38.

Image Level Menu
Move the red framed pointer to
an image item to be set and
then press the SELECT button.

To reset the adjusted data, select "Reset" and press the
SELECT button.  The confirmation box appears and then
select "Yes".  All adjustments return to their previous
figures.  

Exit the Image Adjust Menu.

✔

Store  
item

Interlaced video signal can be displayed in a progressive
picture.  Select one of the following.

Off...........Disabled.
L1............Select “L1” for an active picture.
L2............Select “L2” for a still picture.
Film........Select “Film” for watching a film.  

With this

function, the projector reproduces pictures
faithful to the original film quality.

Noise interference on the screen can be reduced.  Select
one of the following to get smoother images.

Off...........disabled.
L1............lower reduction 
L2............higher reduction

The confirmation box
appears and then
select "Yes".

Press the Point

7 8

buttons to get better balance of

contrast.  (From 0 to 15.)

Press the Point 7 button to soften the image and the Point
8 button to sharpen the image.  (From 0 to 15.)