Beyerdynamic TG V96c 707325 Fascicule

Codes de produits
707325
Page de 2
TG V96c 
Condenser Microphone
O
PTIONAL
A
CCESSORIES
BMC 05 FM
Standard microphone cable 
XLR-XLR, length 5 m . . . . . . . . . . Order # 434.78
BMC 10 FM
Standard microphone cable 
XLR-XLR, length 10 m . . . . . . . . . Order # 434.795
GST 400
Microphone stand, 3/8", 
height 0.90 - 1.65 m,
with removable G 400 boom. . . . Order # 421.294
GST 500
Microphone stand, 3/8", 
height 0.85 - 1.60 m,
with removable, telescopic 
G 500 boom . . . . . . . . . . . . . . . . Order #406.252
ST 600
Stand, 3/8", 
height 0.87 - 1.57 m . . . . . . . . . . Order # 421.316
MKV 8
Microphone clamp, 
3/8" and 5/8" . . . . . . . . . . . . . . . Order # 407.216
T
ECHNICAL
S
PECIFICATIONS
Transducer type . . . . . . . . . . . . . . . . Condenser
Operating principle. . . . . . . . . . . . . . Pressure gradient
Polar pattern . . . . . . . . . . . . . . . . . . Cardioid
Frequency response
Close miking . . . . . . . . . . . . . . . . . . 20 - 20,000 Hz
Distant miking (measured at 1 m). . . 55 - 20,000 Hz 
Open circuit voltage . . . . . . . . . . . . . 4 mV/Pa (-48 dBV) ±2 dB
Nominal impedance . . . . . . . . . . . . . 60 Ω
Load impedance. . . . . . . . . . . . . . . . ≥ 1 kΩ
Max. SPL at 1 kHz . . . . . . . . . . . . . . 150 dB
Signal-to-noise ratio . . . . . . . . . . . . . 64 dB [CCIR, Q-Peak]
Equivalent SPL . . . . . . . . . . . . . . . . . 20 dB [A, RMS]
In-phase rejection 50 - 20,000 Hz. . . ≥ 60 dB
Power supply . . . . . . . . . . . . . . . . . . Phantom power: 24 - 48 V
(recommended: 48 V)
Current consumption . . . . . . . . . . . . 4.3 mA
Connection . . . . . . . . . . . . . . . . . . . 3-pin male XLR, 
1 = ground
2 = +
3 = -
Dimensions
Length . . . . . . . . . . . . . . . . . . . . . . . 185 mm
Shaft diameter . . . . . . . . . . . . . . . . . 26 mm
Head diameter . . . . . . . . . . . . . . . . . 48 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . 330 g
A
PPLICATIONS
The strength of the TG V96c lies in its absolutely faithful reproduction
- even of the finest nuances and on stage every detail counts. The
microphone’s exterior stands out for its sophisticated design, with
a special coated surface that is pleasant to the touch. But it is what’s
inside that makes the TG V96c into a topclass microphone and
makes it stand out with vocalists, professional rental companies and
sound technicians: this true condenser microphone shines with a
captivatingly natural sound. The subtle treble boost provides an
open, finely detailed and unobtrusive sound pattern. Further 
advantage: the TG V96c can be operated with 24 volt phantom
powering without affecting the performance. The 5-layer pop 
protection made from metal gauze of differing mesh sizes and a
sintered plate optimally suppresses plosives while significantly 
improving the rear-attenuation. The TG V96c is rugged enough for
the stage and is supplied with an individual frequency response
curve print out. Handcrafted in Germany.
F
EATURES
• High-quality vocal microphone
• Frequency-independent cardioid polar pattern
• Compensated proximity effectt
• Wire mesh basket without foam
• Shock mounted microphone transducer and electronics
V
ERSION
TG V96c
Condenser vocal microphone, 
cardioid incl. microphone clamp . . Order # 707.325
beyerdynamic GmbH & Co. KG 
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
info@beyerdynamic.de | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2/TG V96c (08.11)
1 of 2