Avaya IPO R9 3RD PARTY IP ENDPT 50 ADI LIC 275615 Manuel D’Utilisation
Codes de produits
275615
Product Description
IP Office 9.0
IP Office 9.0
© 2014 AVAYA All rights reserved.
Page 43
Issue 27.02.0 (Monday, January 06, 2014)
Call Pickup
This feature is used to answer any intercom, transferred or outside call ringing at another specified extension.
Call Timer Display
Displays the duration of a call from the time it was answered.
Call Waiting
Call waiting applies to analog, single line telephones, and applies to the following types of calls:
·
Intercom calls
·
Transferred calls
·
Forwarded calls
·
Covered calls
·
Outside calls (if the extension has a line appearance of the line)
·
Voice Signaled calls
Caller ID Features
The following Caller ID features are supported:
·
Caller ID Inspect (FEATURE 17)
Allows you to view Caller ID information for a second call, without disconnecting the current call or
putting it on hold. Use this feature to inspect ringing, active, or held calls.
Allows you to view Caller ID information for a second call, without disconnecting the current call or
putting it on hold. Use this feature to inspect ringing, active, or held calls.
·
Caller ID Name Display (FEATURE 16)
When an incoming call is ringing at a display telephone, both the name and number appear on the
user’s display. The Number is displayed on the top line, and the Name on the 2
When an incoming call is ringing at a display telephone, both the name and number appear on the
user’s display. The Number is displayed on the top line, and the Name on the 2
nd
line. In some cases
users may wish to see the Caller ID Name on the top line and the Caller ID Number on the 2
nd
line.
This feature provides this capability.
CO Disconnect Time
Use this feature to change the hold disconnect time for an outside line. Different telephone companies use
different length signals. The length of the signal is called the CO or Hold Disconnect time. If you place a call on
hold and the caller hangs up, but the call does not disconnect within a minute after the caller.
different length signals. The length of the signal is called the CO or Hold Disconnect time. If you place a call on
hold and the caller hangs up, but the call does not disconnect within a minute after the caller.
Conference Drop
On 1400 and 9500 digital telephones, you may choose which specific party you want to drop from a
conference call. On ETR and analog telephones, the last party added to the conference call is automatically
dropped.
conference call. On ETR and analog telephones, the last party added to the conference call is automatically
dropped.
Conferencing
The system supports up to 64-party conferencing. A maximum of 2 analog lines can be in any conference call.
Conference calls may consist of combinations of analog lines, digital lines (PRI/T1, SIP), analog telephones,
ETR telephones or digital telephones.
Conference calls may consist of combinations of analog lines, digital lines (PRI/T1, SIP), analog telephones,
ETR telephones or digital telephones.
Contact Closure Support for 2 Devices
The IP500 V2 Control Unit has a Contact Closure control jack on the back panel. This is a 3.5 mm stereo jack
that can drive two external adjunct relays.
that can drive two external adjunct relays.
This feature allows users at eligible extensions to control an external adjunct by entering feature codes at their
system or standard telephone. The port can control a variety of devices, the most common being door strikes,
night bells, lighting, or voice recording systems.
system or standard telephone. The port can control a variety of devices, the most common being door strikes,
night bells, lighting, or voice recording systems.