Avaya IPO R9 SOFTPHONE PLDS LIC 273945 Manuel D’Utilisation
Codes de produits
273945
Product Description
IP Office 9.0
IP Office 9.0
© 2014 AVAYA All rights reserved.
Page 27
Issue 27.02.0 (Monday, January 06, 2014)
Hardware
Control Unit
PARTNER Mode software runs on the IP500 V2 control unit. A PARTNER Mode SD card or IP Office Mu-Law SD
card is required and is installed in the rear of the control unit, providing operating software, Feature Key,
Licenses and directs the system to boot up in PARTNER mode or Quick Mode. An optional SD card may be
installed in the optional SD card slot, providing redundant backup and system upgrade capabilities.
card is required and is installed in the rear of the control unit, providing operating software, Feature Key,
Licenses and directs the system to boot up in PARTNER mode or Quick Mode. An optional SD card may be
installed in the optional SD card slot, providing redundant backup and system upgrade capabilities.
The front of the IP500 V2 Control Unit has 4 expansion bays, which supports the following system modules:
·
Combination Card – Analog Trunks (Max 2 per system)
The Combination Card provides 6 digital station (DS) ports (Ports 1-6); 2 analog station ports (Ports
7-8); 4 CO Line ports (Ports 9-12) and 10 Voice Compression Channels.
The Combination Card provides 6 digital station (DS) ports (Ports 1-6); 2 analog station ports (Ports
7-8); 4 CO Line ports (Ports 9-12) and 10 Voice Compression Channels.
·
ETR6 Card (Max 3 per system)
The ETR6 Card provides 6 ETR (PARTNER ACS telephone) station ports (Ports 1-6); and supports (1)
of the following optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 7-8 become
Power Failure Transfer ports, and ports 9-12 provide 4 additional CO Line Ports. Compatible only with
PARTNER Mode and Mu-Law SD cards with Basic Edition, in North America market only.
The ETR6 Card provides 6 ETR (PARTNER ACS telephone) station ports (Ports 1-6); and supports (1)
of the following optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 7-8 become
Power Failure Transfer ports, and ports 9-12 provide 4 additional CO Line Ports. Compatible only with
PARTNER Mode and Mu-Law SD cards with Basic Edition, in North America market only.
·
DS8 Card (Max 3 per system)
The DS8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following
optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 9-12 provide 4 additional CO
Line Ports. This card supports only the 1400 and 9500 Series telephones.
The DS8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following
optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 9-12 provide 4 additional CO
Line Ports. This card supports only the 1400 and 9500 Series telephones.
·
TCM8 Card (Max 4 per system)
The TCM8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following
optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 9-12 provide 4 additional CO
Line Ports. This card supports only Norstar® T-Series and M-Series telephones.
The TCM8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following
optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 9-12 provide 4 additional CO
Line Ports. This card supports only Norstar® T-Series and M-Series telephones.
·
Phone 2 (Max 4 per system)
The Phone 2 module provides two additional analog station ports and supports one of the following
optional trunk cards: ATM4 or PRI/T1.
The Phone 2 module provides two additional analog station ports and supports one of the following
optional trunk cards: ATM4 or PRI/T1.
·
Phone 8 (Max 4 per system)
The Phone 8 module provides eight additional analog station ports and supports one of the following
optional trunk cards: ATM4 or PRI/T1.
The Phone 8 module provides eight additional analog station ports and supports one of the following
optional trunk cards: ATM4 or PRI/T1.