Avaya IPO R9 ESNTL ED TRIAL ADI LIC 275684 Manuel D’Utilisation
Codes de produits
275684
Product Description
IP Office 9.0
IP Office 9.0
© 2014 AVAYA All rights reserved.
Page 163
Issue 27.02.0 (Monday, January 06, 2014)
IP DECT Radio Base Station 1 (IPBS1)
The DECT R4 Radio Base Stations are used with IP Office only. You can have up to five base stations per
system. Each station connects directly to a LAN switch using Ethernet cabling. The DECT R4 Radio Base
Stations can either be powered by Power-over-Ethernet or by using external power supplies that are available
as accessories.
system. Each station connects directly to a LAN switch using Ethernet cabling. The DECT R4 Radio Base
Stations can either be powered by Power-over-Ethernet or by using external power supplies that are available
as accessories.
Each standard DECT R4 Radio Base Station can handle up to eight concurrent calls while each Compact Radio
Base Station can handle up to 4 concurrent calls. A special protocol called on-air synchronization ensures that
active calls are seamlessly handed over from one DECT R4 Radio Base Station to the next one if a user with an
active call roams through a building.
Base Station can handle up to 4 concurrent calls. A special protocol called on-air synchronization ensures that
active calls are seamlessly handed over from one DECT R4 Radio Base Station to the next one if a user with an
active call roams through a building.
To make sure that the on-air protocol works and that the whole building is covered by the ranges of the DECT
R4 Radio Base Stations, a site survey is needed to determine the number and placement of the DECT R4 Radio
Base stations within the building. Avaya offers these site surveys as a service offer by AGS as well as
measurement kits for business partners who want to do these site surveys on their own.
R4 Radio Base Stations, a site survey is needed to determine the number and placement of the DECT R4 Radio
Base stations within the building. Avaya offers these site surveys as a service offer by AGS as well as
measurement kits for business partners who want to do these site surveys on their own.
The on-air synchronization as well as the access to the phonebook of IP Office is done by a special software
(master server) that can run in parallel to the standard DECT R4 Radio Base Station software on the same
hardware.
(master server) that can run in parallel to the standard DECT R4 Radio Base Station software on the same
hardware.
In this release of IP Office, IPBS2 replaced IPBS1. While they are functionally the same, IPBS2 can be used in
a mixed configuration with IPBS1.
a mixed configuration with IPBS1.
DECT R4 Radio Base Station with internal
antennas
DECT R4 Radio Base Station with
external antennas
Each base station has the following features:
·
Two variants of the standard Radio Base Station: With Internal antenna and with External Antenna
due to regulation, in the US only the base-station with internal antenna may be used.
due to regulation, in the US only the base-station with internal antenna may be used.
·
There are several antennas available for the base-station with external antenna: Standard, Directional
Single, Directional Dual, Omnidirectional.
Single, Directional Dual, Omnidirectional.
·
One variant of the Compact Radio Base Station with internal antennas. The compact base station has
the same look and feel as the base station with internal antenna.
the same look and feel as the base station with internal antenna.
·
Outdoor housing available for both versions
·
Up to five compact base stations per system can be installed
·
8 simultaneous voice and up to 12 signaling channels for the standard Radio Base Stations.
·
4 simultaneous voice and up to 12 signaling channels for the compact Radio Base Stations.
·
Codec G.711, G723, G.729a/b for base station IP trunk connection.
·
Power consumption
·
Power over Ethernet or local power supply supported