Avaya IPO R9 VM PRO 2 ADI LIC 275671 Manuel D’Utilisation
Codes de produits
275671
Product Description
IP Office 9.0
IP Office 9.0
© 2014 AVAYA All rights reserved.
Page 229
Issue 27.02.0 (Monday, January 06, 2014)
M7000
The IP Office TCM8 module and DS16A/30A modules also support the Norstar and BCM M7000 Series Digital
Telephone sets.
Telephone sets.
The following M7000 Series are supported:
Avaya M7000 Series Digital Deskphones
M7100
M7100N
M7208 global
bottom button is dedicated HF
M7208N
bottom button is dedicated HF
M7310 global
bottom right button is dedicated HF
M7310 global + BLF module
bottom right button is dedicated HF
M7310N
bottom left button is dedicated HF
M7324 global
bottom right button is dedicated HF
M7324N
bottom right button is dedicated HF
Only the Global version of the M7000 Series will be supported on the IP Office. The Non-Global version (also
called NA version) of the M7000 Series set is not supported on the IP Office. The Non-Global versions were
available from the late 1980s to the early 1990s and only sold in North America. The Global version was
available in all regions including NA as of the Early-Mid 1990s until the End of Sale of the M7000 Series sets.
called NA version) of the M7000 Series set is not supported on the IP Office. The Non-Global versions were
available from the late 1980s to the early 1990s and only sold in North America. The Global version was
available in all regions including NA as of the Early-Mid 1990s until the End of Sale of the M7000 Series sets.
The Global and Non-Global sets can best be identified through their contrast level:
·
Global version – 9 Contrast Levels
·
Non-Global version – 4 Contrast Levels
Avaya recommends that Avaya partners make the end-customers aware that the M7000 have reached the End
of Life status and hence technical support for them is limited.
of Life status and hence technical support for them is limited.
Message Waiting Indication (MWI) for M7000 Series set on IP Office
The M7000 Series Sets have no designated MWI Light, but users have two options to receive MWI on these
sets on the IP Office.
sets on the IP Office.
· Indicator Button programmed with F65 or F981 - Indicator lamp will lit when a new VM is available. This
option is not available for the M7100 Set since it has no programmable indicator button.
· Voicemail Ringback Feature – when enabled the IP Office will ring the set once set is active again (lift
handset or call placed) to notify about the available VM. The feature is disabled by default.
Once the M7000 Series Sets are connected to the IP Office they will not display "Message(s) for you" on the
display when a message is available.
display when a message is available.