Avaya IPO R9 3RD PARTY IP ENDPT 1 ADI LIC 275611 Manuel D’Utilisation

Codes de produits
275611
Page de 473
Product Description
IP Office 9.0
© 2014 AVAYA All rights reserved.
Page 286
Issue 27.02.0 (Monday, January 06, 2014)
o BCM to CS1000: SIP or SIP/MCDN
o Only UDP will be supported and not TCP
Note:IP Office to CS1000 using H.323 or PRI trunks is not supported, and IP Office to CS1000 using
NRS is no longer supported.
· Platform Requirements:
IP Office:
· Release: IP Office  9.0
· Edition: Essential, Preferred,  Advanced and Server Edition
BCM:
· Release: BCM50 and BCM450 6.0
CS1000:
· Release: CS1000 7.6 with Session Manager
· Centralized Voicemail: Centralized Voicemail for all IP Office systems in the SCN network. BCM systems
may use centralized voicemail of the CS1000. IP Office systems cannot use centralized voicemail of
CS1000. 
· Phones: All phones supported on the individual call servers and releases including Avaya IP Phone
(H.323), Avaya Digital phones, BCM 7000 Series digital phones, BCM1100/1200 Series IP phones (SIP),
DECT R4 phones, and Analog phones. 
SIP Standard Call Feature Support
The following call features are supported for the standard SIP Networking connections described above:
· Standard Call Features:
o Basic Call Completion
o Handling of busy called party
o DTMF and ring-back tone
o Hold and Retrieve
o Call Waiting presentation
o Called Number display
o Calling number and name display
o Abandoned call
· Call Redirection:
o Call Forward (Forward ALL, Forward Busy, Forward No Answer)
o Call Transfer (Attended and Unattended) 
o Call Redirection (To PSTN, Abandoned, Busy)
· Conferencing:
o AdHoc and MeetMe conferencing
· PSTN Toll Bypass:
o Toll Bypass allows each system to leverage the trunk connections of the other system in the network to
avoid international and long distance charges.
Video Collaboration Solution
The Radvision Scopia solution based on the XT5000/4200 platform and the Elite 6000 platform using Radvision
Scopia 7.7 firmware is currently supported in IP Office release 8.1. 
For Scopia 8.0, the video solution has been broken into small and medium deployment scenarios. The small
solution using Scopia 8.0 firmware will be ready for 8.1 FP1. The medium solution has been tested and works
with release 8.1 FP1 with some exceptions for Flare to support Pin codes when connected to IPO. IPO 9.0 will
provide the needed support for this to remove this exception.